3.5.3
Change the Current transformers
DISMANTLE THE SOFTSTARTER
Remove main power cables and control
cables
Disconnect the main power cables and the control
cables as described in chapter 3.3.3, step 1-3.
Remove cover and PCBA
Dismantle the front cover, all cables and the PCBA
as described in chapter 3.4.1, step 1-5.
1.
Remove PCBA bracket
1
Remove the PCBA bracket by lifting it upwards
from unit.
2.
Disconnect flexible bars
1
Loosen (3x)
Torx 30 M6x25 (one screw per
phase) to disconnect the flexible bars.
3.
Remove bypass contactor
1
Loosen (4x)
Torx 25 M3x8 from the bypass
contactor.
2
Loosen (3x)
Torx 30 M6x25 from the
bypass contactor.
3
Remove the bypass contactor (including cable)
by lifting it upwards from unit.
4.
Remove phase bar and current transformer
1
Loosen (1x)
Hexagon no. 8 M10x60 from
the phase bar. Also remove sleeve and washer.
2
Loosen (1x)
Torx 25 M5x18 from the phase
bar.
3
Slide the phase bar outwards from current
transformer until unattached; remove phase bar
and current transformer from unit. Dispose of
expended current transformer.
1
2
3
1
4
3
| Service Manual | Service PSTX210...370
1SFC13105M0201
1
3.5.3_1
1
Tx 30
M6 x 25
3.5.3_2
2
Tx 25
Tx 30
M5 x 18
M6 x 25
3
3.5.3_3
1
Hex no. 8
Tx 25
M10 x 60
M5 x 18
2
3.5.3_4
3
33