DeWalt DWE4557 Instruction Manual

ENGlISH
ANGlE GRINDERS DWE4557, DWE4559, DWE4579,
DWE4579R, DWE4597, DWE4599
Congratulations!
You have chosen a DEWALT tool. Years of experience, thorough product development and innovation make
DEWALT one of the most reliable partners for professional power tool users.
Technical Data
DWE4557 DWE4597 DWE4559 DWE4579 DWE4599 DWE4579R
Voltage
V'"
230 230 230 230 230 230
U.K. & Ireland only
V'"
230/115 230/115 230/115 230/115 230/115 230/115
Type 1 1 1 1 1 1
Power input QS W 2400 2600 2400 2600 2600 2600
LX W
2200
2200
No-Ioad/rated speed rnrr
8500
8500
6500 6500
6500 6500
Wheel diameter mm 180 180 230 230 230 230
Spindle diameter M14 M14 M14
M14
M14 M14
Spindle length
mm 24.0 24.0 24.0 24.0 24.0 24.0
Weight kg 6.5 6.5 6.6 6.6 6.6 6.6
• weightincludes sidehandleandguard
4A
(sound pressure) dB(A) 97 96 97 96 96 96
K,A
(sound pressure dB(A)
3 3 3 3 3
3
uncertainty)
LwA (sound power) dB(A) 108 107 108 107 107 107
!<..vA
(sound pressure dB(A) 3 3 3 3 3 3
uncertainty)
lJibration total values (triax vector sum) delermined according lo EN 60745:
Vibralion emission value ah surface grinding •
ah,AG
=
mls 2
9.0 8.5 7.0
Uncertainty K =
mls
2
1.5 1.5 1.5
7.0
1.5
4.5
1.5
7.0
1.5
Vibration emission value ah disc sanding
a
h .
DS
=
mls
2 2.5 2.5
Uncertainty K
='
m/s 2 1.5 1.5
2.5
1.5
The vibration emission level given in this information
sheet has been measured in accordance with a
slandardised test given in EN 60745 and may be
used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
A
WARNING: The dee/ared vibration
ill
emission level represents the main
• applications of the tool. However if the
tool is used for different applications,
with different accessories or poorly
maintained, the vibration emission may
differ. This may significant/y increase the
exposure level over the total working
periodo
An estimation of the level of exposure to
vibration should a/so take into account
the times when the tool is switched off
or when it is running but not actual/y
doing the lobo This may significant/y
reduce the exposure level over the total
working periodo
. Identify additional safety measures to
protect the operator from the effects of
vibration such as: maintain the tool and
the accessories, keep the hands warm,
organisation of work pattems.
34
Fuses
ENGLlSH
Europe
230 V tools
10 Amperes, mains
Horst Grossmann
Vice President Engineering
DEWALT, Richard-Klinger-StraBe 11,
D-6551O, Idstein; Germany
30.07.2014
U.K. & Ireland 230V tools
13 Amperes, in plugs
J!I\
WARNING: To reduce the risk of injU/y,
\:iiiI
read the instruction manual.
Generai Power Tool Safety Warnings
A
WARNING! Read ali safety warnings
ill
and ali instructions. Failure to fol/ow
the wamings and instructions may result
in eleetric shock, .fire and/or serious
injury
SAVE ALL WARNINGS AND INSTRUCTlONS
FOR FUTURE REFERENCE
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1) WORK AREA SAFm
a) Keep work area clean and welllit.
Cluttered or dark areas invite accidents.
b) Do not operate power too/s in explosive
atmospheres, such as in the presence of
flammable /iquids, gases or dust. Power
too/s create sparks which may ignite the dust
or fumes. .
c) Keep chHdren and bystanders away
while operating a power tool. Distractions
can cause you to lose control.
2) ELEGTRIGALSAFm
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power toots. Unmodified plugs
and matching outlets wil/ reduce risk of
eleetric shock.
b) Avoid body contact with earthed or
grounded surfaces such as pipes,
radiators, ranges and refrigerators. There
is an increased risk of electric shock if your
body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of eleetric shock.
d) Do not abuse
tne
cord. Never use the
cord for cerrvtnq, pulling or unplugging
the power tool. Keep cord away from
heat, oit, sharp edges or moving parts.
Damaged or entangled cords increase the
risk of electric shock.
Definitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
A
DANGER: Indicates an imminent/y
ill
hazardous situation which, if not avoided,
wi/l result in death or serious injury.
A
WARNING: Indicates
a
potentially
ill
hazardous situalion which, if not
avoided, could resuft in death or
serious injury.
A
CAUTlON:. Indicales
a
potential/y
ill
hazardous situation which, if noi
avoided, may result in minor or
moderate injury.
NOTlCE: Indicates
a
practice not
relafed fo personal injury which, if
not avoided, may result in property
damage.
&
Denotes risk of electric shock.
&
Denotes risk of fire.
EC-Declaration of Conformity
MAGHINERY DIREGTIVE
'35
CE
ANGLE GRINDERS
DWE4557, DWE4559, DWE4579, DWE4579R, DWE4597,
DWE4599
DEWALT deelares that these products described
under Technical Data are in compliance with:
2006/42/EC, EN 60745-1, EN 60745-2-3.
These products also comply with Directive
2014/30/EU and 2011/65/EU. For more information,
please contact DEWALT at the following address or
refer to the back of the rnanual.
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of
J/h~~