Safety Symbols
Conventions used in this manual are as follows:
Italicized letters are used when referencing a term used in the program display
window.
Italics is used for emphasis on important items.
Fields where data is entered or user-entered data is italicized.
Actions performed on buttons, checkboxes, etc. appear bolded. For example: Click
Done.
Related Literature
Listed below are documents related to the SVI II ESD.
TUV Certificate No.
Hardware Document
Guidelines/
References
© 2016 General Electric Company. All rights reserved.
Indicates important facts and conditions.
NOTE
Indicates a potentially hazardous situation, which if not avoided
CAUTION
may result in property damage or data loss.
Indicates a potentially hazardous situation, which if not avoided
WARNING
may result in death or serious injury.
SAS0016/07, Vers. 1.0
SVI II ESD Quick Start Guide, MN-SVI-ESD_QSG-GEA19520
SVI II ESD SIL 3 Partial Stroke Test Device, BW500-ESD
Safety Integrity Level Selection – Systematic Methods
Including Layer of Protection Analysis, ISBN 1-55617-777-1,
ISA
Control System Safety Evaluation and Reliability, 2nd Edition,
ISBN 1-55617-638-8, ISA
Safety Instrumented Systems Verification, Practical
Probabilistic Calculations, ISBN 1-55617-909-9, ISA
Masoneilan SVI II ESD Installation and Maintenance Manual
| 19
=