Error Codes - Neopost SI 72 Operator's Manual

7.3 Error codes

error descripyon
Envelope too long.
Document stoppage.
Document stoppage.
Envelope stoppage.
Document stoppage.
Envelope stoppage.
Envelope stoppage.
Document stoppage
Document stoppage.
Envelope stoppage.
Envelope stoppage.
Thickness not measured.
Envelope stoppage.
Document stoppage.
Envelope stoppage.
Envelope stoppage.
Document stoppage.
Service assistance is needed for the error codes with the message "technical failure".
First switch the inserter off and on again, to verify the machine operation. When the error still occurs write down the error code and contact your service organisation.
26/33
suggested solution
Remove envelope.
Remove documents.
Remove documents.
Remove envelope.
Remove documents.
Remove envelope.
Remove envelope.
Remove documents..
Remove documents.
Remove envelope.
Remove envelope.
Remove documents.
Remove envelope.
Remove envelope.
Call service.
Remove envelope.
Remove documents.
see also ......
Page 25.
Page 25.
Page 25.
Page 24 and 25.
Page 25.
Page 24 and 25.
Page 24 and 25.
Page 25.
Page 25
Page 25.
Page 25.
Page 25.
Page 25.
Page 25.
Page 25.
Page 24 and 25.
Page 25.
information
Envelope length error.
Inserting failure.
Document length error.
Transport failure.
Document too thin.
Flap not openend.
Transport failure.
Document too early.
Inserting failure..
Flap sensor covered.
Envelope lost.
Wrong measurement area.
Wrong envelope size.
Seal switch active.
Seal switch covered.
Seal switch covered.
Document too late.
error code
1:10
1:11
1:12
1:13
1:14
1:15
1:16
1:17
1:18
1:19
1:20
1:21
1:22
1:24
1:25
1:26
1:27
SI 72