Advertisement
Prior to installation
This equipment must be installed on a piece of furniture or desk near a
220V power socket. Align the front of the machine with the edge of the
desk in order to position the receptacle correctly.
Do not connect the machine to the mains supply before reaching stage G.
1 - INSTALLATION
A
Check contents: see following list
1 folder-inserter
1 document feeder
4 transparent document holders
2 rear guides for the envelope hopper
1 power lead
1 catch tray
1 quick installation manual
1 user manual
B
Remove the protective cardboard from the insert feeder (feeder C).
Grip the opening lever at the back of the machine
to tilt the tray backwards.
QUICK INSTALLATION GUIDE
Rear view
Carefully remove the blocking cardboard from the
rollers then close the feeder.
Advertisement
Table of Contents
Related Manuals for Neopost SI30
Summary of Contents for Neopost SI30
- Page 1 QUICK INSTALLATION GUIDE Prior to installation This equipment must be installed on a piece of furniture or desk near a 220V power socket. Align the front of the machine with the edge of the desk in order to position the receptacle correctly. Do not connect the machine to the mains supply before reaching stage G.
- Page 2 Remove the two protections located inside the base. Open the machine by pressing the handle located at the front. Carefully remove the sheet of white paper then the blocking cardboard from the roller. Proceed to the following paragraph before closing the machine. Filling the water tray.
-
Page 3: Installing The Machine
Installing the machine. Clip in the rear guides for Hold the feeder pointing the envelope hopper, towards you, plug in the pushing them in properly. connector, then replace the Make sure that they are feeder on the base. positioned correctly. Clip in the transparent docu- ment holders for feeders A and B. - Page 4 Starting the machine: first run The machine’s user default language is set to English. This can be changed by holding down the key and pressing the ON/OFF switch located at the back of the machine. Select the “language” field using the Press to store changes Use the...
-
Page 5: Selecting A Job
2 - USE Selecting a job The machine is ready for use when the following menu is displayed. The job function makes it possible to define and store the format of the main envelope and the document figuring the address, and to define the appropriate feeder selection for the application to be processed. Select the “job number”... -
Page 6: Starting A Job
For further details regarding the functions of this product, or if problems are encountered during installation, please refer to the user manual or contact the Neopost Help desk. Neopost Limited, Neopost House, South Street, Romford, Essex RMI 2AR Customer Service: (01708)
Need help?
Do you have a question about the SI30 and is the answer not in the manual?
Questions and answers