Start-Up Guide; Key Features; Auto Mode - Gree ETAC Installation Manual

Start-Up Guide

1. Turn on electrical power to unit. Then press ON/OFF button, the unit will start to run.
2. Press MODE button, select desired running mode ( Cool, Heat, Dry, Auto and Fan).
3. Pressing + or - button, to set the desired temperature. (It is unnecessary to set
the temp. at AUTO mode.)
4. Pressing FAN button, set fan speed (Auto, Low, Medium and High).
1. Press SLEEP button, to set sleep mode.
2. Press TIMER button, to set up the scheduled timer On or timer Off.

Key Features

AUTO MODE

When AUTO mode is selected, the set temperature will not be displayed on the LCD display,
the unit will automatically select Heat or Cool maintain room temperature.
Privacy LOCK
Privacy Lock will prevent unauthorized access or tampering with control settings. Lock the remote
controller by pressing the "+" and "-" buttons simultaneously for 2 seconds. Repeat to unlock.
Fahrenheit or Centigrade Display
Change the temperature display between degrees °C and °F by pressing the "-" and "MODE" buttons
simultaneously for 2 seconds.
Display Light
The remote control display backlighting can be turned On aor Off by pressing the "+" and "FAN"
buttons simultaneously for 3 seconds. On initial power up, the backlighting defaults to On.
GREE ELECTRIC APPLIANCES, INC.OF ZHUHAI Page 5