Charging Of The Pipette; Charging With The Sartorius Charging Stand And Carousel - Sartorius eLINE User Manual

5. Charging of The Pipette

The battery is protected against discharging
during storage with a plastic protector.
BEFORE USE PLEASE REMOVE THE PL ASTIC
PROTECTOR UNDER THE BATTERY COVER. However,
should the battery become discharged during storage
and recharging is required, a battery symbol will be
observed in the bottom right corner of the display.
The eLINE® pipettes should be charged using the
original Sartorius Charging Stand or Charging
Carousel. However, the eLINE® also features direct
charging by using the eLINE® AC-adaptor.
NOTE: If the battery is fully discharged, the display
will be empty and there will be no response from the
operating buttons. After a few minutes on charge,
the battery symbol will be displayed and the + and
– symbols will continue to blink until the battery is
fully charged.
5.1. Charging with the Sartorius
Charging Stand and Carousel
The charging stands and carousels are bench top
charging units. The charging stand accommodates one
eLINE® pipette and the charging carousel four eLINE®
pipettes. The stands and carousels operate through
the metal contacts placed in the sides of the pipette
and in the head of the charging units.
Before operating the AC-adaptor must be connected
to the socket at the rear of the charging stand or at
the side of the charging carousel as well as to the
electrical outlet. Before connecting the AC-adaptor
to the electrical outlet, check that its voltage settings
corresponds to the voltage settings of your electrical
outlet.
Cat. No. Product
730981 Charging Stand for one pipette
730991 Charging Carousel for 4 pipettes
With universal AC-adaptor (Euro, USA/JPN, UK, AUS, KOR and
China plugs)
9