NEC 28i System Manual page 15

Setting Up DSS Console Monitoring
Stop
In 1101, assign the
DSS Console to the
extension port into
which it is plugged.
For your reference . . .
Program 0309 - DSS Console Operating Mode
Enter 3 for this option to set all of the system's DSS Consoles
for Hotel/Motel operation. This redefines each console's keys as
follows:
This key in
Business Mode
PAGE
GROUP
DOOR
Program 1101 - DSS Console Extension Assignment
For the DSS Console Number you are programming (1-4 in
28i/124i, 1-8 in 384i, 1-16 in 704i), enter the number of the exten-
sion port into which the console is plugged. Remember, each
extension/DSS Console combination is called a Console Number.
Each Console Number can have up to four physical DSS Consoles.
Refer to Direct Station Selection (DSS) Console in your system's
Software Manual for additional details.
Program 1102 - DSS Console Key Range
On the 384i and 704i systems only, set the range of the DSS
Console's keys (1 = extension ports 001-200, 2 = ports 201-400, 3
= ports 401-600). Each Console Number (1-8 in 384i, 1-16 in
704i) can have up to four consoles installed. Each installed con-
sole is called a Connection Number. For example, a Console
Number with two consoles installed has Connection Numbers 1
and 2. Refer to Direct Station Selection (DSS) Console in your
system's Software Manual for more.
DSS Console Monitoring
Does extension
No have a DSS
Console?
Yes
In 1102, assign the
key range for each
DSS Console.
In 0309, enter 3 to
switch all installed DSS
Consoles into the Hotel/
Motel mode.
Has this function in
Hotel/Motel Mode
MESSAGE (Message Waiting)
WAKE UP (Wake Up Calls)
STATUS (Room Status)
Start
Stop
2-7