Siemens SINUMERIK 840D Operator's Manual page 4

SINUMERIK® Documentation
Printing history
Brief details of this edition and previous editions are listed below.
The status of each edition is indicated by the code in the "Remarks" columns.
Status code in the "Remarks" column:
A .... New documentation.
B .... Unrevised reprint with new Order No.
C .... Revised edition with new status.
If factual changes have been made on the page since the last edition, this is indicated by a
new edition coding in the header on that page.
Output Order No.
06.00 6FC5298-0AD60-0BP0
11.00 6FC5298-0AD60-0BP1
06.02 6FC5298-0AD60-0BP2
03.04 6FC5298-0AD60-0BP3
This manual is also included in the documentation on CD-ROM (DOCONCD)
Edition Order No.
09.04 6FC5298-7CA00-0BG1
Trademarks
SIMATIC®, SIMATIC HMI®, SIMATIC NET®, SIROTEC®, SINUMERIK® and SIMODRIVE® are Siemens
trademarks. Other product names used in this documentation may be trademarks which, if used by third parties,
could infringe the rights of their owners.
More information is available on the Internet at:
http://www.siemens.com/motioncontrol
This document was produced with WinWord V 7.0
and Designer V 7.0.
The reproduction, transmission or use of this document or its contents is not
permitted without express written authority. Offenders will be liable for damages.
All rights, including rights created by patent grant or registration or a utility model
or design, are reserved.
© Siemens AG, 1995 - 2004. All rights reserved.
Order No. 6FC5298-0AD60-0BP3
Printed in Germany
Remarks
A
C
C
C
Remarks
C
Other functions not described in this documentation might be executable in the
control. This does not, however, represent an obligation to supply such functions
with a new control or when servicing.
We have checked the contents of this manual for agreement with the hardware and
software described. Nonetheless, differences might exist and therefore we cannot
guarantee that they are completely identical. The information contained in this
document is, however, reviewed regularly and any necessary changes will be
included in the next edition. We welcome all recommendations and suggestions.
Subject to change without prior notice
Siemens-Aktiengesellschaft.