Panasonic CF-U1 series Operating Instructions Manual page 44

Troubleshooting (Basic)
n Starting Up
Other startup
problems.
44
l Press + (F9)
ence Manual "Setup Utility") to return the Setup Utility
settings (excluding the passwords) to the default values.
Start the Setup Utility and make the settings again.
*2
For Numeric keyboard model, select [Load Default
Value] in [Exit] menu by using
(Enter), or connect a USB keyboard and press
l Remove all peripheral devices.
l Check to see if there was a disk error.
A Remove all peripheral devices including an external
display.
B Click (Start) - [Computer] and right-click [Local
Disk (C:)], and click [Properties].
C Click [Tools] - [Check Now].
Ÿ A standard user needs to enter an administrator
password.
D Select the option in [Check disk options] and click
[Start].
E Click [Schedule disk check] and restart the computer.
A Click [start] - [My Computer] and right-click [Local
Disk(C:)], and click [Properties].
B Click [Tools] - [Check Now].
C Select the option in [Check disk options] and click
[Start].
l Start the computer in Safe Mode and check the error
details. When the [Panasonic] boot screen disappears
at startup, press and hold
dows Advanced Options Menu is displayed. Select the
Safe Mode and press
*3
When [Password on boot] is set to [Enabled] in the [Se-
curity] menu of the Setup Utility, [Enter Password] ap-
pears after the [Panasonic] boot screen disappears. As
soon as you enter the password and press
press and hold
*4
For Numeric keyboard model, connect a USB keyboard
and press .
in the Setup Utility (è
*2
+ (F8)
(Enter).
+ (F8).
Refer-
and press
.
*3
until the Win-
*4
(Enter),