Beyerdynamic TG 500 User Manual page 16

TG 500 – Diversity receiver
• Audiomix – ONLY ON TG 500DR!
If you wish to emit both audio signals (e.g. vocals and guitar),
mixed across both outputs, set the "Audiomix" function to
"ON".
In the "Gain" menu, you can adjust the volume for each channel
accordingly until you achieve the desired mix.
To use both channels independently of each other, set the
"Audiomix" function to "OFF".
Press the enter button to open the submenu.
Press the up or down button
(OFF) the "Audiomix" function. Press the enter button
confirm.
• Squelch
In the "Squelch" menu, you can manually set a squelch, i.e.
an HF level from which the receiver is muted in order to
suppress noise during transmission pauses.
Press the enter button to open the submenu.
Press the up or down button
squelch between -80 und -110 dBm.
Press the enter button to confirm.
to activate (ON) or deactivate
to
to select the threshold for the
Figure 2-49: Selecting the "Audiomix" submenu
AudiomiX
oFF
Figure 2-50: Activating/deactivating the Audiomix
AudiomiX
oN
Figure 2-51: Selecting the "Squelch" submenu
squelch
-93 b
m
Figure 2-52: Setting the squelch
mute at
-93 b
m
16