Table of Contents
Advertisement
BEFORE DRIVING
Temperature Gauge
EXAMPLE
When the ignition switch is in the "ON"
position or the ignition mode is "ON", this
gauge indicates the engine coolant tem-
perature. Under normal driving conditions,
the indicator should stay within the normal,
acceptable temperature range between
"H" and "C". If the indicator approaches
"H", overheating is indicated. Follow the
instructions for engine overheating in the
"EMERGENCY SERVICE" section.
NOTICE
Continuing to drive the vehicle when
engine overheating is indicated can
result in severe engine damage.
2-41
Brightness Control
79MH0226
When the ignition switch is turned to the
"ON" position or the engine switch is
pressed to change the ignition mode to
"ON", the instrument cluster lights come
on.
Your vehicle has a system to automatically
dim the brightness of the instrument panel
lights when the position lights or headlights
are on.
When the position lights and/or headlights
are ON, you can control the meter illumina-
tion intensity.
To increase the brightness of the instru-
ment panel lights, turn the brightness con-
trol knob (1) clockwise.
To reduce the brightness of the instrument
panel lights, turn the brightness control
knob (1) counterclockwise.
EXAMPLE
If you attempt to adjust the display
(1)
while driving, you could lose control
of the vehicle.
Do not attempt to adjust the display
while driving.
NOTE:
• If you do not turn the knob for more than
10 seconds while activating the bright-
ness control, the brightness control dis-
79MH0227
play will be canceled automatically.
• When you reconnect the battery, the
brightness of the instrument panel lights
will be reinitialized. Readjust the bright-
ness according to your preference.
The information display is shown when the
ignition switch is in the "ON" position or the
ignition mode is "ON".
WARNING
Advertisement
Table of Contents
