TEST SETUP & ADJUSTMENT
CM5000 Mobile Repeater/Gateway - Basic Service Manual
35
STEP 4
Confirm the "LT" is selected.
STEP 5
Adjust the output power to +37+/-0.5 dBm using the Rotary knob.
STEP 6
Press the [Right] navigation key for course adjustment.
STEP 7
Press the [Up] navigation key to select "FB".
STEP 8
Adjust the output power to +37+/-0.5 dBm using the Rotary knob.
STEP 9
Press the [Right] navigation key for course adjustment.
STEP 10
Press the [Left] navigation key and confirm "POWER 35 dBm" on the display.
STEP 11
Confirm the "LT" is selected.
STEP 12
Adjust the output power to +35+/-0.5 dBm using Rotary encoder
STEP 13
Press the [Right] navigation key for course adjustment.
STEP 14
Press the [Up] navigation key to select "FB".
STEP 15
Adjust the output power to +35+/-0.5 dBm using the Rotary knob.
STEP 16
Press the [Right] navigation key for course adjustment.
STEP 17
Press the [Left] navigation key and confirm "POWER 30 dBm" on the display.
STEP 18
Confirm the "LT" is selected.
STEP 19
Adjust the output power to +30+/-0.5 dBm using the Rotary knob.
STEP 20
Press the [Right] navigation key for course adjustment.
STEP 21
Press the [Up] navigation key to select "FB".
STEP 22
Adjust the output power to +30+/-0.5 dBm using the Rotary knob.
STEP 23
Press the [Right] navigation key for course adjustment.