Maintenance; Disc Brakes - ISLABIKES Creig Owner's Manual

Maintenance

Keeping your bike clean and maintained comes with many benefits. Not
only will your Islabike perform better but it will be safer, last longer and look
great. To do this we have listed some regular checks to help you along the
way. Of course, if you are unsure of anything we strongly recommend you
seek professional advice or contact our technical support team on +44
(0)1584 856 881 or email techsupport@islabikes.co.uk.
Firstly, moving parts on your bicycle will need lubricating from time to
time. Weather conditions are generally the biggest factor that determine
frequency of maintenance and lubrication. However, it is also heavily
dependent on the frequency, type and duration of riding.
Component Lubricant
Chain Oil
Rear derailleur Oil
Wheel bearings Grease
Headset n/a
Pedals n/a
Suspension fork Oil
Brake fluid DOT 4
Creig 24 / Creig 26
Frequency
Weekly or after washing / rain
Weekly or after washing / rain
6 months
Sealed bearings
Sealed bearings
12 months - service
12 months - service

Disc brakes

Considered one of the most important safety features of your Islabike. It is
a good habit to check the brakes on a regular basis. This should be done
depending on the type, frequency or duration of riding. If your bike has not
been used for a period of time we recommend a quick check before riding.
Brake operation – Pull on one brake at a time and look at the brake pads.
Check to see if they are touching the discs evenly when applied. If the
pads are not contacting the discs correctly, they are uneven, rubbing or feel
spongy to apply please contact our technical support team on +44 (0)1584
856 881 or email techsupport@islabikes.co.uk.
Brake pad wear and replacement – Brake pads do not last forever.
Eventually they will need replacing. This will depend on the type, frequency
and duration of riding. Brake pads must be replaced if the total thickness of
the backing plate and pad friction material is less than 3mm.
Riding with backing plate and pad friction material less than 3mm
can result in reduced braking performance, crash, and/or death.
Pads fitted as standard are organic compound. We recommend
replacing with the same compound to maintain performance.
Brake fluid and replacement – The brakes fitted to your bike contain
DOT 4 hydraulic fluid. Your fluid will need replacing annually to maintain
performance. Always seek professional advice – specialist tools are
required for this maintenance.
Do not allow brake fluid to contact skin or eyes. If fluid comes into
contact with skin or eyes seek dilute with plenty water and seek
medical advice.
E-mail: techsupport@islabikes.co.uk Telephone: +44 (0)1584 856881