Safe Maintenance - ABB A175-M66 Operation Manual

Operation Manual / 2 Safety / A100-M axial
1 Safety
1.14

Safe maintenance

Occupational safety
Injuries to persons
Severe injuries to personnel or fatal accidents can be caused by mechanical
influences as a consequence of hazardous and inadequate operational pro-
WARNING
cedures or non-compliance with safety and health standards.
When working on the turbocharger always wear safety footwear and pro-

tective clothing to protect against mechanical hazards.
Keep personal protective equipment in perfect condition.

Obey mandatory signs.

Observe the general rules for occupational safety and prevention of acci-

dents.
Only perform operations that are described in this manual.

Only perform operations for which you have received instruction or train-

ing.
Wear safety footwear to protect against mechanical hazard and risk of fall-
ing.
Wear protective clothing.
Risk of falling
When working on the turbocharger, there is a risk of falling.
Do not climb onto the turbocharger or onto attached parts and do not use

WARNING
them as climbing aids.
Use suitable climbing aids and working platforms for work above body

height.
Comply with the general accident prevention regulations.

Only perform work on the turbocharger when you are in a physically and psychologically

stable condition.
Only work with tools, equipment and appliances that function properly and are suitable for

the task.
Power tools must be grounded and cables must be undamaged.

Keep the workplace clean; clear away any loose objects and obstacles on the floor.

Keep the floor, equipment, and turbocharger clean.

Have oil binding agents ready and provide or keep oil pans at hand.

Clean up any spills.

Have fire protection means and extinguishing agents available.

© Copyright 2016 ABB. All rights reserved. HZTL4023_EN
Page 14 / 17
Revision B May 2016