Charge The Battery Of The I Liad - iRex iLiad Quick Reference Manual

1.2. How do I charge the battery of the iLiad?
1. Connect the iLiad.
Insert the connector of the travel hub into your iLiad with the arrow pointing to the back of
the device.
2. Plug the adaptor cable in the travel hub.
Insert the adaptor plug in the Travel hub. When the iLiad is charging the LED is coloured
red (or orange if the green LED is also active).
The battery of your iLiad is fully charged when the red LED stops burning.
A complete empty battery takes up to two hours to be fully charged.
NOTE: The iLiad needs a minimum power charge to start-up. If the charge is to
low the processor will not start up while the LED keeps burning and draining the
battery. If the battery is full enough or the device is connected to the main volts
this will not occur.
Copyright © 2006 iRex Technologies. All rights reserved.
4