Page 2: Table Of Contents
COMPONENTS LIST THE ILIAD 4.1 I NDICATION 4.2 O WITCH 4.3 F LIPBAR 4.4 U 4.5 D EVICE ANAGER 4.6 P REVIOUS 4.7 C ONFIRM 4.8 N 4.9 A RCHIVE 4.10 C ONNECT Copyright © 2007 iRex Technologies. All rights reserved.
Page 3 THE STYLUS THE USER INTERFACE 8.1 R EADING WRITING 8.2 O SCREEN EATURE INDER 8.2.1 NDICATOR 8.2.1.1 Busy Indicator 8.2.2 OOLBAR 8.2.2.1 Rename File 8.2.2.2 Activate Keyboard 8.2.2.2.1 Keyboard 8.2.2.2.2 Writepad 8.2.2.2.3 Settings Copyright © 2007 iRex Technologies. All rights reserved.
Page 4 Pen Colour 8.2.2.10 Eraser 8.2.2.11 New Page 8.2.2.12 Landscape view 8.2.2.13 Continuous Mode 8.2.2.14 Fit to Screen 8.2.2.15 Zoom 8.2.2.16 Previous Zoom 8.2.2.17 8.2.2.18 Backward / Forward 8.2.2.19 Search file 8.2.2.20 Sort files Copyright © 2007 iRex Technologies. All rights reserved.
Page 5 OUND 10.4 K UFFERING 10.5 K 10.6 F LIPBAR PAGE FORWARD 10.7 L ANGUAGES 10.8 A RCHIVE LOCATIONS 10.9 USB CONNECTION 10.10 S ETTINGS FOR COMPUTER CONNECTION 10.11 N 10.12 E MAIL Copyright © 2007 iRex Technologies. All rights reserved.
Page 6 ELETING A ETWORK ROFILE 12 THE SCRIBBLE FUNCTION 12.1 S UPPORTED ORMATS 12.2 U SING THE CRIBBLE UNCTION 12.3 M AKING OTES OR RAWINGS 12.4 A NNOTATIONS IN 12.5 ® CRIPT OTES Copyright © 2007 iRex Technologies. All rights reserved.
Page 7 HY THE I ELIVERY ERVICE 14.2 C REATING AN CCOUNT 14.3 U PGRADING OFTWARE 15 MYIREX 15.1 U SER DETAILS 15.2 C HANGE ASSWORD 15.3 R PIN C ESET 16 ELECTRONIC PAPER DISPLAY TECHNOLOGY Copyright © 2007 iRex Technologies. All rights reserved.
Page 8 All Rights reserved. Reproduction in whole or in parts is prohibited Without a written consent of the copyright owner. iRex Technologies BV © 2007 Copyright © 2007 iRex Technologies. All rights reserved.
Page 9: Preface
For iRex to provide this additional service, you will need to create a user account. Once it has been set up, you can use your iLiad to: • Get software upgrades •...
Page 10 (second key on the top left corner) or for more information please go to http://www.iRexTechnologies.com/ Combined with new applications and features your iLiad becomes an even more powerful and convenient tool that will enhance your electronic reading and digital writing experience.
Page 11: Safety And Cleaning Information
Safety and Cleaning information 2.1 Important Safety Instructions Guidelines • Please read this manual carefully before using the iLiad. • The product should only be connected and used in the way described in this manual. • The most recent downloads and information are available at our website: www.iRexTechnologies.com...
Page 12: Precautions
While every effort has been made to ensure that the information contained in this guide is accurate and complete, no liability can be accepted for any errors or omissions. iRex Technologies reserves the right to change the specifications of the hardware and software described herein at any time without prior notice.
Page 13: Cleaning Instructions
• Make sure your iLiad is unplugged • Use a damp, soft, lint-free cloth • Avoid getting moisture in openings • Don’t use aerosol sprays, solvents, detergents, alcohol or abrasives Copyright © 2007 iRex Technologies. All rights reserved.
Page 14: Components List
Components list iLiad (includes CF- and SD protection cover, stylus) Travel hub International Power adaptor + 3 plugs USB-cable Copyright © 2007 iRex Technologies. All rights reserved.
Page 15: The Iliad
The iLiad Connect key 4.10 Indication led Electronic Paper Up key Display Device Manager Archive keys Flipbar Previous key Confirm key Next key Safety cord holes On/Off switch Headphone Travel hub connector 4.11 Copyright © 2007 iRex Technologies. All rights reserved.
Page 17: Indication Led
4.1 Indication LED • Green LED: the iLiad is processing. • Red LED: the battery of the iLiad is charging • The LED will burn orange if both the red and green colour is activated. 4.2 On/Off Switch • Slide switch to left and hold for 2 seconds to turn device on •...
Page 18: Device Manager Key
4.5 Device Manager Key • Press this key to open the device manager which contains the iLiad Settings, iLiad Profiles, Reference Material, Recent Documents, CF Card, MMC Card, USB and Main Memory. • Hold the key for 2 seconds to show recent documents.
Page 19: Connect Key
4.13 Reset Switch • If the device no longer responds anymore this switch turns the iLiad off. Afterwards you can turn the iLiad back ‘on’ by using the ‘on/off switch’. CAUTION: Please make sure the iLiad is NOT reset while new software is being installed.
Page 20: Travel Hub
To recharge the iLiad connect the power cable to the travel hub (and the travel hub to the iLiad). • The led on the iLiad will turn red to indicate that the battery is recharging. • A complete empty battery will take +/- 2 hours to recharge.
Page 21: Power Adaptor
Note: Make sure the iLiad has completed the start up process before making an USB connection with the PC, otherwise the iLiad might not be properly recognized by the PC. Power Adaptor • Input: 100-240V/ 400m/A • Output: 12.0V. 1.2A max Note: Any DC adaptor with an output voltage range between 10 and 18 V can be used.
Page 22: The Stylus
EMR techno logy (Electro-Magnetic Resonance) send and position sensing method. The stylus slot on the back of the iLiad (4.12) has a sensor inside and upon removal of the s tylus the digitizer will be activated. This igitizer is a sensor board behind the Electronic Paper Display that will communicate with the stylus to track the position;...
Page 23 Note: If you put the stylus on top of the screen, the digitizer will consume power because the pen point is near the digitizer. It is best to always put the stylus into the iLiad after each use to save battery life.
Page 24: The User Interface
The main and rger part of the screen is for reading and writing, on the lower part of the screen is where the feature finder is situated. 8.1 Reading/writing area 8.2 Feature Finder Copyright © 2007 iRex Technologies. All rights reserved.
Page 25: Reading/Writing Area
The feature finder displays information and enables user interactivity with the stylus to operate the extra features of the device. Page/screen number 8.2.1 Page indicator 8.2.2 Toolbar Copyright © 2007 iRex Technologies. All rights reserved.
Page 26: Page Indicator
To navigate through a document you can use the stylus t jump immediately to the desired position in accordance with the page indicator or you can use the flipbar to turn the pages. Copyright © 2007 iRex Technologies. All rights reserved.
Page 27: Busy Indicator
8.2.1.1 Busy Indicator When opening a document the page indicator will be sho wn as the busy indicator which will indicate the iLiad is processing the operation. Busy indicator .2.2 Toolbar he toolbar is divided into two types of tools.
Page 28: Rename File
• In the second field enter a description o f the file. • When done click on the rename file icon again to close dialog box. Copyright © 2007 iRex Technologies. All rights reserved.
Page 29: Activate Keyboard
Note: The rename function is only possible on files formatt ed to the iLiad struc ture. To reformat files to iLiad structure, open them first before renaming. ote: It is not possible to rename single files (like the notes templates) 8.2.2.2...
Page 30: Keyboard
• With the Language soft key you can change the language of the keyboard. Note: Currently only English (UK) and Simplified Chinese is supported. Move Up / Down Language key Copyright © 2007 iRex Technologies. All rights reserved.
Page 31: Writepad
The handwriting will automatically be recognised and entered into the entry field. • With the character selections keys you can change the ty pe if characte rs you want to input. Writing area Character selection keys Copyright © 2007 iRex Technologies. All rights reserved.
Page 32: Settings
.2.2.3 Key Lock • To lock the keys of the iLiad, click on the key lock icon, to indicate the keys are locked the icon will be inverted. • To unlock the keys of the iLiad, click again on the key lock icon.
Page 33: Background Connect
To make a manual backg round connection to the iDS or a Computer press the background connect icon. • The icon will be inverted to indicate the iLiad is making a background connection, and will remain inverted while the background connection is active. .2.2.6 New content •...
Page 34: Delete File
• When you make annotations in PDF the annotations will be saved along with the original document. • The pen tool has 2 submenu’s • Pen thickness • Pen colour Copyright © 2007 iRex Technologies. All rights reserved.
Page 35: Pen Thickness
Pen Thickness 8.2.2.9.1 • Click on the pen thickness icon to access the pen thickness submenu. • The pen thickness submenu will display 4 different pen thickness: 1 Pixel 3 Pixels 5 Pixels Copyright © 2007 iRex Technologies. All rights reserved.
Page 36: Pen Colour
• Use the stylus to erase your notes or drawings (the drawing will only be erased p artially, press on the eraser icon again to completely erase the drawing). Copyright © 2007 iRex Technologies. All rights reserved.
Page 37: New Page
• To deactivate continuous mode click on the inverted continuous mode icon. Tip: Enable continuous mode to eas ily read documents you have zoomed into or when reading in landscape mode. Copyright © 2007 iRex Technologies. All rights reserved.
Page 38: Fit To Screen
8.2.2.16 Previous Zoom • Click on Previous Zoom icon to go back to the previous zoom selection. • The icon will be inverted to indicate that the previous zoom selection is displayed. Copyright © 2007 iRex Technologies. All rights reserved.
Page 39: Pan
To start a search for a file or files while in the con tent lister click on the search file icon. The search icon will be inverted while the search function is active. Copyright © 2007 iRex Technologies. All rights reserved.
Page 41: Sort Files
You can see the location you are searching in, in the title bar. 8.2.2.20 Sort files • Click on the Sort Files icon in the content lister to access the sort files configuration. Copyright © 2007 iRex Technologies. All rights reserved.
Page 42 In step 1 you can select your preferred sort criteria based on system attributes: File name, File extension, File size, File date or information tags: Title, Description. • In step 2 you can select ascending or descending sort order by using the arrows. Copyright © 2007 iRex Technologies. All rights reserved.
Page 43: Share File
Your files will now be sorted based on your selected criteria. ote: The sort is limited to the location where it is initiated. You an see the location in the title bar. .2.2.21 Share file Copyright © 2007 iRex Technologies. All rights reserved.
Page 44 • Shared files will be copied or moved to the outbox folder on your iLiad. All files in the outbox will be transferred to your Computer during the next connection. Note: To use this feature you need to install the iLiad Companion Software –...
Page 46: Iliad Settings
9.1 iLiad Settings he iLiad settings contain the different settings for configuring nd personalizing your iLiad to your preference. (see chapter 10) 9.2 Network Profiles In this section you will find a list of network profiles. You can create or edit a profile in this list (See chapter 11) 9.3 Reference Materials...
Page 47: Usb (Page/Screen 2)
The main memory contains the four archives (Newspapers, Books, Documents and Notes) and a ny other documents or lders that were created on the iLiad. This memory is used for easy file management from your Note: the device manager shows the free space on the storage locations (Internal memory, CF, M MC, USB).
Page 48: Iliad Settings
10.1 Start up settings In the iLiad settings under Start-up Settings you can choose which document or folder the iLiad will show when starting up. For example you choose: ‘notes fold er’, the next time you start your iLiad, it will show you the contents of the ‘notes folder’.
Page 49: Stylus Calibration
Note: The factory settings will show the Quick Reference guide at start up 10.2 Stylus Calibration To calibrate the stylus select ‘start calibration’ on the settings start up screen. Copyright © 2007 iRex Technologies. All rights reserved.
Page 55 Step 5 After this step the start screen will appear, your stylus has been calibrated. Note: the iLiad will not give any message stating that the calibration has finished, when the iLiad Settings screen reappears calibration was successful Copyright © 2007 iRex Technologies. All rights reserved.
Page 57: Sound
10.3 Sound Here you can enable or disable the sound of your iLiad If you have your sound turned on you will hear a soft click sound when pressing a button or using the stylus. When the sound is turned off you will not hear these soft clicks.
Page 58: Key Buffering
W e recommend this setting for new iLiad users. you enable key buffering, the iLiad will remember the keys pressed and process them when the device is ready. 10.5 Keys Here you can select the minimum duration for a long key press.
Page 59 Additional language option s will become available in the near future. Language selection screen appears before first use (out of the box use). See screenshot below: Copyright © 2007 iRex Technologies. All rights reserved.
Page 60: Archive Locations
USB stick). fter you select a memory type for an archive key, the folders books, documents, newspapers and notes are created automatically. In these folders you can organise your files. The Copyright © 2007 iRex Technologies. All rights reserved.
Page 61: Usb Connection
Insert the required memory extension and press the connect button again. Note: - Files that are stored on the main memory of your iLiad must be moved via the PC and a card reader to the corresponding folder on the memory extension.
Page 62: Settings For Computer Connection
10.10 Settings for computer connection In order to connect the iLiad with your Computer you need to onfigure the following settings. 10.11 Name In this field you can enter any name you would like. Copyright © 2007 iRex Technologies. All rights reserved.
Page 63: Email
Note: If you have changed your password on MyIrex make sure you also change your password here. 10.14 PIN Code With this function you can enable to protect your iLiad with a PIN code against unauthorized use. Copyright © 2007 iRex Technologies. All rights reserved.
Page 64 When PIN code protection is enabled you will need to enter the PIN code each time: • the iLiad is switched on. • you enter the iLiad settings. • to unlock the device after locking it with the Lock Screen icon. Copyright © 2007 iRex Technologies. All rights reserved.
Page 65 PIN Code via MyIrex (see Chapter 14 for more info). Warning: Before you enable PIN Code protection make sure you have successfully configured an iLiad network profile or you will not be able to reset your PIN Code when needed.
Page 66 2: Enter the name of the shared destination folder into this eld. This is a shared folder on your computer from which the iad will download and upload content from and to. Copyright © 2007 iRex Technologies. All rights reserved.
Page 67: B Ackground Connect
Tip: You can find out the name of your computer and/or network, by clicking on the settings icon of the iLiad Companion Software on your Computer and selecting the Device Settings. Step 4: In these fields you need to enter the username and password of the computer you want to log on.
Page 68 If you select ‘on’ you will need to select the time interval for the ‘Background connect’. The time selected is expressed in minutes and should be between 5 and 99. Copyright © 2007 iRex Technologies. All rights reserved.
Page 69 (e.g. If you enable ‘Background connect’ and select 15 as interval, the iLiad will connect to the iDS every 15 minutes to check for new content to download.) During the ‘Background connection’ you can continue to operate the iLiad as usual.
Page 70 Time to connect to iDS nabling ‘time to connection’ causes the iLiad to download ontent from the iDS at a set time. When the iLiad is switched ff, it will ‘wake-up’ to download content from iDS. Copyright © 2007 iRex Technologies. All rights reserved.
Page 71 If you select ‘on’ you will need to select the time when the iLiad ill connect with iDS. Up to three different time sets can be filled in. (iLiad will connect on all time sets) If you want to include software downloads (new release,…) check the box: ‘include software downloads while connected to...
Page 72 Note: you should first set your date and time by connecting to iDS. Afterwards you can use this page to update the time for your current timezone. Copyright © 2007 iRex Technologies. All rights reserved.
Page 73: D Evice I Dentification
10.19 Device Identification This is a device overview page with Wired/WiFi MAC Address, version numbers, software version, etc… Copyright © 2007 iRex Technologies. All rights reserved.
Page 74: Iliad Network Profiles
One profile will be used as your preferred profile and will always be tried first by the iLiad when you wish to connect to the iRex Delivery Service (iDS) or a Computer. Once a profile is created it can be edited or deleted.
Page 75: D Ial - Up N Etwork R Equirements
• Your wireless router device needs to have DHCP enabled to provide the iLiad automatically with an IP address. It is not possible at this stage to set a static IP address into the iL for a wireless connection. Most router devices will have DHCP enabled by default.
Page 76: N Etwork P Rofile C Onfiguration
11.2 Network Profile Configuration Quick way to create or edit a n etwork profile: long key press on the connect button, you will see the following screen: Copyright © 2007 iRex Technologies. All rights reserved.
Page 77 The iLiad will connect automatically to the ne twork type you hoose. (wired, wireless, dial-up) Screenshot above shows iLiad connecting to a secure wireless network. Copyright © 2007 iRex Technologies. All rights reserved.
Page 78 The iLiad nly shows WiFi profiles that are in they air. The signal strength dicator shows the wireless signal strength. If the connection was successful the iLiad will show ‘connected’. And will start to download content.
Page 79 If you have chosen dial-up go to chapter 11.2.3 Advanced way to create or edit a network profile: open the device manager and select the iLiad Profiles button. The following screen will appear. Copyright © 2007 iRex Technologies. All rights reserved.
Page 80: C Reating A W Ired N Etwork P Rofile
11.2.1 Creating a Wired Network Profile In the iLiad network profiles m enu select the ‘wired’ button. The iLiad will generate a list with previously stored wired networks. To create a new wired network, select the ‘create new profile’ button.
Page 82 Proceed. Step 2: Wired is selected. Step 3: Here you have to select how your iLiad gets an IP address. If your router device or network has DHCP you have to Copyright © 2007 iRex Technologies. All rights reserved.
Page 83 If you have selected Static, you will be asked to enter an IP address for the iLiad. In addition you also need to enter a subnet mask, the defau gateway and the DNS. Copyright © 2007 iRex Technologies. All rights reserved.
Page 84 A proxy server regulates internet traffic and is usually installed in company networks. Hint: if you are not sure, select 'No Proxy' and click 'Test' to try this profile. If you have selected Proxy you will see the following screen: Copyright © 2007 iRex Technologies. All rights reserved.
Page 85 Proceed. ote: Do not include the protocol (e.g. http://) when you enter the proxy address. ow enter the port number for your Proxy server and click on Proceed (default port is 8080). Copyright © 2007 iRex Technologies. All rights reserved.
Page 86 To save the profile and go back to the iLiad network profiles ancel: To cancel the configurations you have created. The rofile will not be saved and you will go back to the iLiad network rofiles list. Copyright © 2007 iRex Technologies. All rights reserved.
Page 87: C Reating A W Ireless N Etwork P Rofile
11.2.2 Creating a Wireless Network Profile Select the wire less button and ‘create new profile button’ if you ant to create a wireless profile Copyright © 2007 iRex Technologies. All rights reserved.
Page 89 If you do not now the name of the network, you can click on search to scan for an available wireless network. Note: Only broadcasted networks will appear in the scanned list. Copyright © 2007 iRex Technologies. All rights reserved.
Page 90 Otherwise enter the SSID, click on Proceed. You will be able to select the security type of the wireless etwork. • If the network is not protected, choose ‘Off’ and proceed the settings at step 5. Copyright © 2007 iRex Technologies. All rights reserved.
Page 91 WEP. Note: Both security types require settings for the encryption key. This key can be entered after a wireless network has been chosen. Copyright © 2007 iRex Technologies. All rights reserved.
Page 92 (also known as WPA Personal mode) and the data encryption to TKIP. he security key for this network is the shared secret / assphrase that you entered in the wireless router. Copyright © 2007 iRex Technologies. All rights reserved.
Page 93 WPA security please consult the User anual of your wireless network router or contact your network dministrator. Note: The iLiad does not support WPA-EAP Copyright © 2007 iRex Technologies. All rights reserved.
Page 94 Please set your local wireless router device to a Hexadecimal security key using values 0-9 and a-f. For more information on WEP security please consult the User Manual of your wireless network router or contact your network administrator. Copyright © 2007 iRex Technologies. All rights reserved.
Page 95 Proceed. Step 2: Wireless button will show, click on proceed Step 3: Automatic button (if you choose static, the static utton will show) will show, click on proceed Copyright © 2007 iRex Technologies. All rights reserved.
Page 96 Step 4: If the network you wish to connect to is protected by a proxy server you need to click on Proxy otherwise select No Proxy (default) and click on Proceed. Copyright © 2007 iRex Technologies. All rights reserved.
Page 97 'Test' to try this profile If you have selected Proxy you will see the following screen: ere you can enter the address or name of the Proxy server and click on Proceed. Copyright © 2007 iRex Technologies. All rights reserved.
Page 98 Ok: o save the profile and go back to the iLiad network profiles list. Cancel: To cancel the configurations you have created. The profile will not be saved and you will go back to the iLiad network profiles list. Copyright © 2007 iRex Technologies. All rights reserved.
Page 99: Creating A Dial-Up Network Profile
11.2.3 Creating a Dial-up Network Profile Select the Dial-up button and ‘cr eate new profile’ button if you want to create a wireless profile Copyright © 2007 iRex Technologies. All rights reserved.
Page 101 Fill in the logon credentials you received from your ISP: phone number, username and password, click on Proceed. Note: if you don’t know these settings, please contact you ISP (internet service provider) for detailed information. Copyright © 2007 iRex Technologies. All rights reserved.
Page 102 Step 3: Automatic button will show. Step 4: If the network you wish to connect to is protected by a proxy server you need to click on Proxy otherwise select No Proxy (default) and click on Proceed. Copyright © 2007 iRex Technologies. All rights reserved.
Page 103 Hint: if you are not sure, select 'No Proxy' and click 'Test' to try this profile If you have selected Proxy you will see the following screen: ere you can enter the address or name of the Proxy serve r and lick on Proceed. Copyright © 2007 iRex Technologies. All rights reserved.
Page 104 Ok: o save the profile and go back to the iLiad network profiles list. Cancel: To cancel the configurations you have created. The profile will not be saved and you will go back to the iLiad network profiles list. Copyright © 2007 iRex Technologies. All rights reserved.
Page 105: D Eleting A N Etwork P Rofile
Now click on OK to delete this profile. This will bring you ba ck to the iLiad network profiles and the profile you deleted will be removed from the list. Copyright © 2007 iRex Technologies. All rights reserved.
Page 106: The Scribble Function
(e.g. Notes_2006_08_10_09-25-39) • The notes or drawing are saved in two different formats: a picture (PNG file) and digitized form (IRX file) to use with MyScript Notes software. Copyright © 2007 iRex Technologies. All rights reserved.
Page 107: A Nnotations In Pdf
12.5 iRex MyScript Notes® The iRex MyScript Notes® is an additional software package for your PC to use w ith the iLiad. The iRex MyScripts Notes® will allow yo...
Page 108: Iliad Companion Software
This software package is available for download on our website: www.iRexTechnologies.com. See the iLiad Companion Software Manual for more information on how to install and configure the iLiad Companion Softw are. Copyright © 2007 iRex Technologies. All rights reserved.
Page 109: Upgrading Software Via Ids
In order to benefit from these s oftware releases you need to reate an account. 14.2 Creating an Account o connect to the iRex Delivery Service (iDS) you first need to reate an account. This can be done easily by following the teps: •...
Page 110 Configure the iLiad Settings in your iLiad and ins ert your e- mail address and the password you received. Press the Device Manager Key (4.5) and select the iLiad Settings in the Device Manager. Picture may differ from current software version.
Page 111 14.3 Upgrading Software Upgrading the software of your iLiad is as easy as clicking one button. The device downloads and installs the newest release automatically. This ensures your device will always run on the latest software available.
Page 112 • When a new software version is downloaded the follow message will be displayed on the downloa d screen for 5 seconds: ‘--- Download complete ---‘ Copyright © 2007 iRex Technologies. All rights reserved.
Page 114 15 seconds. The message will be displayed, t he display will turn to white. Installing software upgrade. Please wait. ote: With any other download the device will return to display a st of downloaded items. Copyright © 2007 iRex Technologies. All rights reserved.
Page 115 Step 2: The iLiad will now restart itself and will start installing the new software release automatically. CAUTION: Ple ase make sure the iLiad is NOT reset while the new software is being installed. If the installation is interrupted at is stage it will program the iLiad with incomplete software, rendering it unusable and you will not be able to reinstall it.
Page 117 When the device has started up again, the iLiad tries to connect to iDS again to download any additional packages tha t may be needed for the software upgrade. After this you can use your iLiad and try out the new features. Starting up the iLiad following an installation of a new software version, will take longer than a normal start-up.
Page 118: Myirex
To log on to MyIrex you need to enter your username (email ddress) and password, these are the same as those configured to your iLiad settings to connect to iDS (See Chapter 13.2 How create an account). t the moment there are two functionalities available in MyIrex: ser details and Change password.
Page 119 PIN code, you can reset your PIN code here. Step 1: select the MAC address of your iLiad and click on Res PIN code. Step 2: Connect to iDS by pressing the connect button for 2 seconds .
Page 121 - Low power usage - Light weight - Rugged - Thin eading: - Close to paper readability - Reading under all circumstances (outdoor) - No screen flicker lectrophoretic technology is not suitable for video applications. Copyright © 2007 iRex Technologies. All rights reserved.

iRex iLiad User Manual

1 Preface

2 Safety and Cleaning Information

Guidelines

Precautions

Disclaimer

3 Components List

4 The Iliad

5 Travel Hub

6 Power Adaptor

7 The Stylus

8 The User Interface

9 The Device Manager

10 Iliad Settings

Quick Links

Need help?

Questions and answers

Related Manuals for iRex iLiad

Summary of Contents for iRex iLiad

Table of Contents