Panasonic KX-NCP500 Pc Programming Manual page 348

4.7 [2-4] Week Table—Time Setting
Feature Manual References
17.1.3 Tenant Service
17.1.5 Time Service
2. Break—Break 1–3 Start—Setting
Enables the setting of the start time for each break period.
Default
Disable
Value Range
Disable, Enable
Maintenance Console Location
4.7 [2-4] Week Table—Time Setting
Programming Manual References
None
Feature Manual References
17.1.3 Tenant Service
17.1.5 Time Service
2. Break—Break 1–3 Start—Hour, Minute
Specifies the start time for each break period. Times can only be set when
Setting is set to Enable.
Default
00:00
Value Range
00:00–23:59
Maintenance Console Location
4.7 [2-4] Week Table—Time Setting
Programming Manual References
None
Feature Manual References
17.1.3 Tenant Service
17.1.5 Time Service
348 PC Programming Manual
2. Break—Break 1–3 Start—
Document Version 2009-12