Generator Locked Out; Waiting For Generator - DSE 8610 MKII Operator's Manual

4.2.1.1

GENERATOR LOCKED OUT

Status
Generator Locked Out
to the alarms page to investigate. Press the Stop/Reset Mode
alarm does not clear the fault is still active.
4.2.1.2

WAITING FOR GENERATOR

NOTE: For further details of module configuration, refer to DSE Publication: 057-238
DSE8610 MKII Configuration Suite PC Software Manual.
Status
Waiting For Generator
page to check to see if the generator voltage and frequency is higher then the configured Loading
Voltage and Loading Frequency.
057-254 ISSUE: 2
Description of Controls
Generator Locked Out indicates that the Generator cannot be
22:31
started due to an active Shutdown or Electrical Trip Alarm on the
module. Press the Next or Previous Page
Waiting For Generator indicates that the Generator has started but
22:31
has not reached the required Loading Voltage and or Loading
Frequency as set in the module's configuration. Press the
Next or Previous Page
Page 90 of 188
button to scroll
button to clear the alarm, if the
buttons to scroll to the Generator