Chapter 3. Quickpanel+ Software; Operating System; Backup Utility; Storage Manager - GE IC754VSL06CTD Datasheet

Chapter 3 QuickPanel+ Software

Chapter 3. QuickPanel+ Software

This chapter provides introductory information on the QuickPanel+ software with procedures
for completing some of the most common tasks you will encounter.

3.1 Operating System

Microsoft Windows Embedded Compact 7 is the operating system for the QuickPanel+. It is a
full 32-bit O/S with a graphical user interface.
The QuickPanel+ operating system is stored in flash memory and copied to a block of DRAM
for execution. The operating system starts automatically following a power-up or reset of the
QuickPanel+.
For detailed information about using the operating system, refer to
http://windows.microsoft.com.

3.2 Backup Utility

Backup saves changes that you make to the Windows Registry or Desktop to Flash memory.
This utility is required because the QuickPanel+ is not battery powered. Specifically, Backup
does the following:
■
■
Run Backup whenever you make configuration changes to the operating system or
installed applications, and before shutting down the QuickPanel+.

3.3 Storage Manager

Use Storage Manager to repair or format lost or corrupted data volumes. Storage Manager
can repair data volumes existing either in SD Card, battery-backed SRAM (BBSRAM), or
USB Flash Keys (thumb drives). Data volumes existing in the main flash file system of the
QuickPanel+ may not be repaired by Storage Manager.
Storage Manager, accessed from the Control Panel folder, is a Microsoft product for which
on-line help is available.
GFK-2847
Stores the Windows Embedded Compact 7 registry (including any control panel
settings) in Flash memory.
Stores any changes (or additions) made to the '\Windows' subtree of the file system
in the user block of flash memory.
QuickPanel+ User's Manual–November 2013
Chapter 3. QuickPanel+ Software
15