3
Starting the CB 2500 and Performing
Initial Setup
This chapter describes the initial setup that is required from installation of the
system unit to powering on the server blades.
□ Connecting the system unit to the power supply
□ Preparing the system console used for configuring the settings of the CB
2500
□ Setting the network for the server blades and modules
□ Preparing the server blades so that they can operate in LP mode
□ Powering on the server blade
□ Resetting the power of the server blade
□ Restarting the BMC of a server blade
□ Setting the UEFI of a server blade
3-1
Starting the CB 2500 and Performing Initial Setup
Hitachi Compute Blade 2500 Series Getting Started Guide