Table of Contents
Advertisement
18
Fig. 2.5 Inserting the connecting cable
Getting started
2.3
mains connection
InSertIng the ConneCtIng CaBle
The connecting cable can best be inserted when the telescopic handle
1
slightly pulled out. Before using the Kobold for the first time, insert the connect-
ing cable as follows:
•
Lead the connecting cable through the handle
•
Pull the connecting cable through the cable channel on the telescopic handle
downwards.
•
Plug the connector plug into the connection socket
2
engage.
After inserting the connecting cable, leave it connected to the device. Only
remove the connecting cable when you replace it.
wIndIng uP and unwIndIng the ConneCtIng CaBle
3
Warning! Risk of electric shock!
• Disconnect the mains power cord from the socket before you wind up
the connecting cable.
Caution! Danger of damaging electrical parts!
• Make sure not to damage the device and the connecting cable while
winding up.
is
.
until you can hear it
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the kobold VK150 and is the answer not in the manual?
Questions and answers
I cannot push the vorwerk 150 power plug in to get the click sound to know that it is in place, is there a trick to get it to engage,
cannot insert new cable in VK150 due to bar inside the grip