Nature and extent of the accessories included may vary. Accessories can be purchased separately and may not be available in each country . The illustrations shown in this manual are meant to illustrate the functions of the Kobold VK150 Vacuum cleaner...
Page 4
Item Kobold VK150 Vacuum cleaner Item Floor care accessory parts Power cord Non-electronic accessories: Cable hook (covered), rotatable Kobold HD50 Hard floor attachment - for hard floor vacuuming Cable channel Telescopic rod handle Electronic accessories: Connector plug Kobold SP530 Hard floor cleaner...
Congratulations on the purchase of your new vacuum clean- the following meanings: er, the Kobold VK150 Vacuum cleaner. Delivering brilliance and cleanliness, the light and easily manoeuvrable Kobold will stay true to you and your household for many years. Its...
Page 7
SuItaBIlIty oF the deVICeS For FloorS Carpet type eB370 SP530 hd50 hard floor type SP530 hd50 Sealed wooden flooring (e.g. Velour carpeting parquet, beech or oak floorboards) Loop pile carpeting Laminate Berber carpeting Oiled wooden flooring (e.g. floorboards, parquet Sisal carpeting made of beech or oak) light, loose carpets PVC, CV, linoleum...
For your safety For your SaFety Greatest possible safety is a characteristic of Vorwerk products. The product safety of the Kobold VK150 Vacuum cleaner and its accessories can however only be ensured if this chapter is followed. Intended use Note! The appliance is not to be used by children younger than 8 years.
Page 9
For your safety KoBold VK150 VaCuum Cleaner The Vacuum cleaner is solely intended for removing dust within domestic areas. The vacuum cleaner may only be used with the corresponding Vorwerk acces- sories. • To find out which carpet and hard floors are suitable for using the accessory parts, refer to tables 1.1 and 1.2 (see page 6).
Page 10
For your safety KoBold hd50 hard Floor attaChment The hard floor attachment is only intended for cleaning even hard floors in domestic areas. KoBold SP530 hard Floor Cleaner The hard floor cleaner may only be used on the hard floor types listed in Tab. 1.2. The following flooring types must never be wet cleaned: untreated cork flooring, untreated tile floors, untreated softwood floors.
Note! • Read the instruction manual carefully before using the Kobold VK150 Vacuum cleaner for the first time. • Observe the following notes in particular. • Keep the instruction manual for future use. It is an important part of the Kobold and must be kept with it if you pass it on to someone else.
Page 12
• Never carry the device by the connecting cable. • Do not operate the electrical devices or the connecting cable any further if they are damaged. • Contact your nearest Vorwerk customer service department in the event of damage. Fire hazard! •...
Page 13
• Keep small parts such as the Dovina fragrance chips or the cover of the revi- sion opening of the hard floors attachment away from children. Loss of suitability for allergy sufferers! • Use only original Vorwerk filters and filter bags. Do not reuse spent filter bags.
Page 14
• Never use the hard floor cleaner without cloth. The device fulfils the safety instructions of the country in which it was sold by an authorised Vorwerk organisation. When using the device in another country, compliance with local safety standards cannot be guaranteed. Vorwerk therefore...
For your safety danger levels • For your safety, also observe the hazard warnings specified in the following sections. You can identify the hazard warnings in the following sections by the warning symbol and/or a signal word indicating the danger level: warning danger level Signal word...
Getting started gettIng Started In this chapter you will learn how to set up your Kobold VK150 Vacuum cleaner for use. You will come to know the basic functions of your Vacuum cleaner and how to handle it properly. Want to use your Vacuum •...
Getting started Standby position and power setting Once you have connected the Kobold VK150 Vacuum cleaner to one of the ac- cessory parts, you can set the device into standby position or keep it in power setting. Caution! Risk of injury from toppling device! The standby position is used to turn off the device after finishing cleaning.
Page 18
Getting started SettIng the deVICe Into Power SettIng In power setting, the Kobold VK150 Vacuum cleaner can be moved freely into all directions on the ground. The following steps describe how to set the device from standby position into power setting: ...
Getting started mains connection InSertIng the ConneCtIng CaBle The connecting cable can best be inserted when the telescopic handle slightly pulled out. Before using the Kobold for the first time, insert the connect- ing cable as follows: • Lead the connecting cable through the handle •...
Page 20
Getting started Wind up the connecting cable when not using the Kobold VK150 Vacuum cleaner. • Push in the cable hook so that it opens and pull it out. • Wrap the connecting cable around the cable hook and the cable hook on the grip.
If at first it does not engage, move the telescopic handle slightly up or down. If you wish to turn off the Kobold VK150 Vacuum cleaner or use it for cleaning work above the floor, move the telescopic handle to the lowest position in the previously mentioned fashion.
Before carrying the device, push in the telescopic handle all the way. uSIng the reCeSSed grIPS To transport the Kobold VK150 Vacuum cleaner or to use it on stairs, mattresses or other areas in the room, you can lift it by using both recessed grips •...
Switching the device on and off, setting the power performance level SwItChIng on the deVICe • To switch on the Kobold VK150 Vacuum cleaner, slide the main switch forwards. SettIng the Power PerFormanCe leVel In general, we recommend power performance level A (Automatic). ...
Operation uSIng the rotatIng SwItCh • When carrying the device with the shoulder strap, you can alternately use the rotating switch on the backside of the device: • To switch on the device, turn the rotating switch to the right. •...
Operation Kobold hd50 hard floor attachment The Hard floor attachment is a special nozzle that allows for cleaning even hard floors of various types. In contrast to other commercially available hard floor nozzles, this nozzle is also suited for removing coarse dirt. It can easily move around furniture or stands and vacuums evenly along all skirting boards.
Operation Kobold eB370 electronic brush Are you using your Kobold VK150 Vacuum cleaner with the Electronic brush? Then this chapter is for you! The electric brush can be used on carpets and hard floors. Here you will learn everything about its basic function and the bristle suction on carpets and matresses.
Operation 3.2.1 Brush-suction The brush-suction process with the Kobold EB370 Electronic brush is the more thorough alternative to conventional vacuuming. The Electronic brush not only vacuums dust and dirt, it also “combs” through the carpet at the same time by applying the rotating roller brushes.
Page 28
Operation SettIng In general, we recommend power performance level A (Automatic). • Select the appropriate setting for your flooring according to “Tab. 3.1 Settings for floor types” on page 28. • Set the power performance level accordingly. • Set the normal or soft function accordingly. tIPS For BruSh SuCtIon •...
Page 29
Operation Power with normal function with soft function performance for the following floor types: for the following floor types: level - silk carpeting - light, loose carpets - loose carpets with fringes a or 1-2 - deep-pile carpeting - very dense velour carpeting a or 2-3 - conventional velour carpeting - Berber-style pile carpeting...
Operation Note! Risk of damage from improper use! • Avoid working with the device on one specific spot for a prolonged period of time. • Avoid the suction of loose carpets/fringes. • Do not leave the device working on one specific spot for a prolonged period of time, otherwise you might damage the carpet.
Page 31
(see chapter “8 Services” on page 91). Kobosan active can also be obtained at our online shop at www.vorwerk-kobold.com Warning! Risk of electric shock! • Never use the Freshener kit with liquid, foam or damp cleaning agents.
Page 32
Operation • Never disconnect the mains power cord from the mains by pulling the connecting cable, but rather by unplugging the mains power cord from the socket. Note! Risk of damage from improper use! • Test the colour fastness of the carpet against Kobosan active at an inconspicuous spot before application.
Page 33
Operation InSertIng the KoBold FK370 FreShener KIt The Freshener kit consists of two cartridges and two grey roller brushes. • Insert the Freshener kit cartridge with the green arrow into the side with the green symbol on the grey cover and the other Freshener kit cartridge into the opposite side.
Page 34
It will removed over time during daily maintenance. Fig. 3.9 Removing the Freshener Kit Replace the filter bag in the Kobold VK150 Vacuum cleaner in due time. To do this, observe the suction value display. Fig. 3.10 Inserting the roller brushes...
Page 35
Operation remoVIng old StaInS Note! Risk of damage from improper use! • Test the colour fastness of the carpet against Kobotex at an inconspicuous spot before application. Old stains might become more visible after the carpet was cleaned. In most cases Kobotex will be able to remove these.
Operation • Pull the Kobold FK370 Freshener kit out of the Kobold EB370 Electronic brush before cleaning. • To do this, lift the freshener brushes out of the Freshener kit with your fingers. • Hold the freshener brushes in such a way that water cannot flow into the ...
Page 37
(see chapter “8 Services” on page 91). Lavenia can also be obtained at our online shop at www.vorwerk-kobold.com Note! Risk of damage as a result of incompatible cleaning agents! • Test the colour fastness of the mattress against Lavenia at an incon- spicuous spot before application.
Page 38
Operation InSertIng the KoBold mB370 mattreSS BruSheS • Insert the Mattress brush with the green end into the side with the green symbol on the grey cover and the other roller brush into the opposite side. • Applying a slight twist, push the Mattress brushes onto the drive shaft until they are completely inserted.
Operation Kobold SP530 hard floor cleaner The Hard floor cleaner enables vacuum cleaning and wet cleaning of hard floors in only one step – with significant savings in time and effort. Additionally, the hard floor cleaner offers the possibility of dry cleaning. The Hard floor cleaner cleans hard floors particularly efficiently.
Operation 3.3.1 accessories for Kobold SP530 hard floor cleaner ConCentrated CleanIng agent KoBoClean Koboclean is suitable for cleaning various waterproof floors. Thanks to its high cleaning power, even stubborn dirt can be removed reliably. Koboclean meets all legal requirements regarding environmental compatibility and biodegradability. Koboclean is available as Koboclean Parquet which has been especially developed for cleaning wood surfaces (cork, parquet floors and laminate) and also as Koboclean Universal for cleaning all other wet wipeable surfaces (e.g.
• Never leave the Hard floor cleaner standing on floors which are particularly sensitive to moisture. SwItChIng on In order to activate the Hard floor cleaner, the Kobold VK150 Vacuum cleaner must be switched on first: • Switch on the Vacuum cleaner. The LED display marked with “On”...
Page 43
Now, close the secondary air flap on the device by stepping onto the flap from behind. The Hard floor cleaner will start when the flap has been closed. SwItChIng oFF In order to deactivate the Kobold SP530 Hard floor cleaner, the Kobold VK150 Vacuum cleaner must be switched off. •...
Page 44
Cloth holder SP520/530 From the deVICe Warning! Risk of electric shock! • For your own safety, switch off the Kobold VK150 Vacuum cleaner at its handle each time that the cloth is replaced and pull out the power plug in addition.
Page 45
• In the case of floors which are extremely sensitive to moisture, rewipe the floors with a dry Kobold MF520/530 Parquet Cleaning cloth and the Kobold VK150 Vacuum cleaner at full power. • You should also rewipe the floor with a dry Parquet Cleaning cloth and the Vacuum cleaner at full power if the floor is too moist, e.g.
Page 46
Operation For processed wood surfaces (e.g. oiled/waxed cork, parquet, laminate), please use the Kobold MF520/530 Parquet. • Open the Dosing bottle • Take the lower part of the Dosing bottle and hold it diagonally so that the 5 ml mark is the lowest point. •...
Page 47
Note! Risk of damage from improper use! • Avoid forced insertion and extraction of the Cloth holder. • Hold the Kobold VK150 Vacuum cleaner at its handle grip, and tilt the Vacuum cleaner towards the left-hand side. Fig. 3.25 Inserting the cloth holder into...
Page 48
Operation • Hold the Kobold SP520/530 Cloth holder at its handle grip (green) and, while the side cover is open, slide it into the device until it has reached the end position (A). • Cause the Cloth holder to latch by pulling the handle grip upwards. •...
Operation rePlaCIng the KoBold mF520/530 CleanIng Cloth Note! Risk of damage from improper use! • Never leave a wet cloth in the device when storing it. If the Cleaning cloth is too dry or too dirty, remove it from the Kobold SP530 Hard floor cleaner and insert a new Cleaning cloth.
Thanks to the Kobold SD15 Soft nozzle, you can now easily remove dust from ceiling lamps and chandeliers. ConneCtIng the teleSCoPIC tuBe To use the Telescopic tube, the Kobold ESS150 Electronic suction hose must be connected to the Kobold VK150 Vacuum cleaner. • Insert the adaptor of the Telescopic tube into the handle of the Electronic suction hose.
This chapter explains how to operate the Polsterboy. ConneCtIng the PolSterBoy • Connect the Electronic suction hose to the Kobold VK150 (chapter “3.4 Kobold ESS150 Electronic suction hose” on page 48). • Connect the Polsterboy to the Electronic suction hose. To do this, slide the ...
Page 52
Operation regulatIng the SuCtIon ForCe • Regulate the suction force as usual on the Kobold VK150 Vacuum cleaner. • Select power performance level 2 on your Vacuum cleaner in normal case. • Select power performance level 1 on your Vacuum cleaner when dealing with loose and/or sensitive material.
Operation Kobold gd15 window cleaning kit Used with your Kobold VK150 Vacuum cleaner, the Window cleaning kit removes dirt and dust from your windows and other even glass surfaces in no time. The Kobold Window cleaning kit cleans your windows thoroughly and streak- free.
Page 54
Fig. 3.31 Koboclear cleaning suspension Koboclear can be purchased at your customer representative or at the Vorwerk shops or at the service centre (see chapter “8 Services” on page 91). Koboclear can also be obtained at our online shop...
Operation KoBold glaSS Cloth gt15 The Glass cloth is made up of a special microfibre, which was selected specially for working with Koboclear cleaning suspension. Apply the cleaning suspension on the window panes by wearing the glass cloth and spreading it while applying little pressure.
Operation ConneCt the KoBold glaSS nozzle gd15 onto the KoBold VK150 VaCuum Cleaner • Attach the Glass nozzle to the Kobold ESS150 Electronic suction hose or the Kobold TR15 Telescopic tube. To do this, push the connection port of the Glass nozzle above the connection port of the Electronic suction hose or the Telescopic tube.
Operation • For each further m² of glass surface, apply a smaller amount (1 to 2 squirts) of the Koboclear cleaning suspension onto the Kobold Glass cloth GT15. 3.7.3 allow Koboclear to dry The alcohol content of the cleaning suspension ensures that the window pane dries quickly.
Page 58
) to lock the Telescopic tube. regulate SuCtIon ForCe • Regulate the suction force on the Kobold VK150 Vacuum cleaner as usual. • Select power performance level 3 in normal case of your Vacuum cleaner. Fig. 3.40 Vacuum Koboclear with Telescopic tube Fig.
Operation additional accessories If you are using the nozzle product line, you will have the perfect solution for every case. This chapter will give you an overview of the different nozzles and their areas of application. You can attach the accessories directly to the Kobold ESS150 Electronic suction hose or to the Kobold TR15 Telescopic tube/Electronic suction tube.
Page 60
Connect the Drilling dust attachment to the tip of the Kobold VD15 Variable nozzle. • Switch on the Kobold VK150 Vacuum cleaner. • Place the drilling dust attachment with the back seal against the wall. Due to the suction force of the Vacuum cleaner, the Drilling dust attachment will adhere to the wall by itself, provided it is completely even.
Operation 3.8.2 Kobold Sd15 Soft nozzle Your Soft nozzle can either be used for vacuuming loose dust in a gentle manner or to remove adherent dirt. You can modify the bristle ring length and thereby adjust it to the type of surface. It is especially well-suited to vacuum uneven surfaces such as keyboards, bookshelves, lampshades and all types of furniture surfaces.
Operation 3.8.3 Kobold Fd15 Flexo nozzle Your Flexo nozzle is a multi-purpose accessory that can be used on different surfaces. In order to do this you can adjust the nozzle for the different areas of application: nozzle setting for vacuuming - Furniture surfaces and stairs Flexo nozzle –...
Page 63
Operation KoBold Fd15 Flexo nozzle – toP Part You would like to vacuum dust, threads and hair from upholstery, fabrics or the inside of your car? • Then remove the nozzle‘s cleaning plate. • To do this, push the release lever on the backside of the attachment down.
Maintenance maIntenanCe Maintain your Kobold VK150 Vacuum cleaner regularly, so it can bring you maxi- mum pleasure and proper functioning at all times. In the following chapter you will learn how to maintain the different devices and accessory parts and how to exchange parts.
Spare parts and consumable materials You have purchased a quality product from Vorwerk. To keep you as satisfied in the future with your Kobold device as you were the first day, we recommend you take advantage of our reorder options for original care products and original...
Page 66
Maintenance Certified quality can be identified by Vorwerk has made reorders easy: the Original Quality Logo! Either in person at your customer representative or at the service centre (see chapter “8 Services” on page 91). At our online shop at www.vorwerk-kobold.com...
Vorwerk Premium filter bags can be purchased at your customer representative or at the service centre (see chapter “8 Services” on page 91). Vorwerk Premium filter bags can also be obtained at our online shop at www.vorwerk-kobold.com oPenIng the FIlter unIt ...
Page 68
• Push the corners of the Filter bag between the leads at the filter cover of the Kobold VK150 Vacuum cleaner. • Ensure that the filter bag is placed completely under the filter cover.
Fig. 4.6 Closing the filter unit protection filter The Motor protection filter serves to protect your Kobold VK150 Vacuum cleaner from pollution. To ensure a long service life for your Vacuum cleaner, make sure to maintain the Motor protection filter regularly.
Page 70
Maintenance CleanIng the KoBold VK150 motor ProteCtIon FIlter Note! Risk of damage from improper use! • Do not clean the Motor protection filter with water or other fluids. exChangIng the motor ProteCtIon FIlter • If the Motor protection filter has been damaged or is extremely dirty, insert a new one.
Maintenance Kobold eB370 electronic brush Warning! Risk of electric shock! • Always switch off the device before all retrofitting, cleaning and main- tenance work and disconnect the mains power cord from the socket. Caution! Risk of injury from moving parts! •...
Maintenance CheCKIng roller BruSheS The green tufts of bristles must be longer than the yellow tufts , Fig. 4.9 on page 70). Otherwise the Kobold EB370 Electronic brush will not have the desired brushing effect. • Check from time to time if the green tufts of bristles are still longer than the ...
• Never clean electrical connections with water, wet cleaning agents or the wet Vorwerk Cleaning cloths. • Never pour water over the device. Never rinse it with running water. Caution! Risk of injury through trapping of body parts!
Maintenance 4.4.1 Checking and cleaning the sealing lip frame Check the condition of the sealing lips regularly; if required, remove fluff balls, hairs, etc. dISmountIng the SealIng lIP Frame In order to be able to clean the sealing lips thoroughly, the frames can be dismounted from the device.
Maintenance 4.4.2 Checking the suction channel Regularly check the suction channels for blockage. • To remove blockages, remove the suction channel from the device at the lower end. • Remove any objects blocking the device. • Re-insert the suction channel by pressing it into the aperture in the device until you can feel it latching.
Maintenance Kobold PB430 Polsterboy Warning! Risk of electric shock! • Always switch the device off before all retrofitting, cleaning and maintenance work and disconnect the mains power cord from the socket. • Never clean the Polsterboy or the suction nozzle with water or damp cleaning agents.
Maintenance Kobold window cleaning kit Warning! Risk of electric shock! • Always switch the Kobold VK150 Vacuum cleaner off before all retrofitting, cleaning and maintenance work and disconnect the mains power cord from the socket. • Never insert the Kobold Glass nozzle GD15 into the Vacuum cleaner, if the Glass nozzle is still wet after cleaning.
Maintenance device/ time/Frequency Step accessories Kobold GD15 after every window • Thoroughly wash the Glass Glass cloth cleaning cloth under flowing water. if required • Wash the Glass cloth in the wash machine at max. 60 °C without fabric conditioner, as specified on the Glass cloth label.
Filter cover has It is possible you have bumped against the opened cover. become detached Reinsert the cover: from the device. • Lay the Kobold VK150 Vacuum cleaner horizontally on the floor. • Place the filter cover in a 60° angle ...
Page 80
Troubleshooting Fault Possible causes and rectification KoBold VK150 VaCuum Cleaner The Vacuum The Premium Filter bag FP140/150 is probably full. cleaner suction • Exchange the Premium Filter bag. force is declining. The Suction channel of the Vacuum cleaner or that of another connected device is blocked.
Page 81
Troubleshooting Fault Possible causes and rectification KoBold eB370 eleCtronIC BruSh The Kobold EB370 The roller brushes are not correctly inserted. Electronic brush • Check if the roller brushes are correctly inserted. is too loud. The roller brushes must always be aligned with the corresponding coloured symbol (green to green).
Page 82
You might have set the power performance level too high. can only be moved • Use the main switch on the Kobold VK150 Vacuum cleaner with great difficulty. handle to set the device to a lower power performance level or use the automatic setting in general.
Page 83
Cleaner The Kobold SP530 It is possible that the motor is overstrained. Hard floor cleaner • Switch off the Kobold VK150 Vacuum cleaner. is automatically • Switch on the Vacuum cleaner and close the switched off, secondary air flap of the Hard floor cleaner.
Page 84
Troubleshooting Fault Possible cause and correction KoBold SP530 hard Floor Cleaner The Hard floor Moisture has been sucked in. cleaner has switched • Switch off the Vacuum cleaner. off by itself; the red • After the device has dried completely, switch operation indicator on the Vacuum cleaner and close the secondary “STOP”...
Page 85
Troubleshooting Fault Possible cause and correction KoBold SP530 hard Floor Cleaner The cleaning It is possible that the Kobold MF370 performance of Cleaning cloth is soiled excessively. the Hard floor • Replace the cloth. cleaner worsens. It is possible that the Cleaning cloth is too dry. •...
Page 86
Troubleshooting Fault Possible cause and correction KoBold SP530 hard Floor Cleaner The system is It is possible that the Cleaning agent has been overdosed. streaking. • Repeat the cleaning process with a new cloth and clear water. It is possible that there are residual quantities of old care products and cleaning agents on the floor.
Page 87
• Connect the Polsterboy to the Kobold ESS150 Electronic suction hose. The Kobold VK150 Vacuum cleaner is not switched on. • Switch on the device. The bristles of the Fringes or fabrics were sucked in and pulled again.
Page 88
Possible causes and rectification KoBold Fd15 Flexo nozzle The Flexo nozzle‘s • Reattach the wings. wings are unhooked. If the fault cannot be rectified, please contact Vorwerk‘s customer service department (see Section “8 Services” on page 91). Fig. 5.6 Reattach the wings...
If you nevertheless wish to dispose of the packaging, you can do this at any time and without limitation via your regional facilities (waste paper skip, yellow skip, recycling depot, waste paper collection etc.). To this end, Vorwerk commissions legally authorised licensees.
We are actively involved in cutting back on waste packaging during the development stages and are committed to its disposal and recycling. SaVIng energy Vorwerk products protect the environment: They only use a small amount of energy with high suction performance. enVIronmentally FrIendly ProduCtIon We attach a great deal of importance to environmental protection when manufacturing our products.
Page 91
Disposal and environmental protection reuSaBle materIal The material for our products can nearly be completely recycled. We largely avoid using PVC. When manufacturing our products, we ensure “sorted” materials: The substances used can later be separated accordingly at modern facilities without much energy expenditure.
Warranty ; Services warranty Any warranty services can be found in the order note or purchase contract. SerVICeS Either in person with your customer representative or at the service centre or www.vorwerk-kobold.com...
Technical details teChnICal detaIlS Kobold VK150 Vacuum cleaner KoBold VK150 Safety signs VaCuum Cleaner Housing High-grade recyclable plastic Motor Maintenance-free reluctance motor with ball bearings with electronic performance control at a nominal rotation speed of 60,000 rpm. Blower Single-stage radial fan...
Page 94
Freshener kit Weight 1.6 kg Dimensions Height: approx. 7 cm (with horizontal joint) Width: approx. 30 cm Length: approx. 33 cm (with horizontal joint) Noise emission 81 dB(A) re 1pW sound power level with Kobold VK150 according to EN 60704-3...
Page 95
3 kg Dimensions Height: approx. 12 cm (with horizontal joint) Width: approx. 31 cm Length: approx. 36 cm (with horizontal joint) Noise emission 87 dB(A) re 1pW sound power level with Kobold VK150 based on EN 60704-3 on smooth tiles...
Page 96
220-240 volts alternating current 50/60 Hertz Power output 50 watts Weight 600 g Dimensions Height: approx. 11 cm Width: approx. 8 cm Length: approx. 25 cm Noise emission 87 dB(A) re 1pW sound power level with Kobold VK150 based on EN 60704-3 on upholstery fabric...
EU energy label classification* eu energy laBel ClaSSIFICatIon* Manufacturer/supplier Vorwerk Elektrowerke GmbH & Co. KG, Wuppertal, Germany KoBold VK150 Model Kobold VK150 with Kobold EB370 uPrIght VaCuum Energy efficiency class wIth Indicative annual 32.9 kWh/year based on 50 cleaning cycles. The KoBold eB370...
Page 98
VK150 Vacuum cleaner Choose quality. Vorwerk quality ORIGINAL Q UA L I T Y Vorwerk UK Limited Thorp Building Whitmore Lane Sunningdale Berkshire SL5 0NS United Kingdom...
Need help?
Do you have a question about the kobold VK150 and is the answer not in the manual?
Questions and answers
I cannot push the vorwerk 150 power plug in to get the click sound to know that it is in place, is there a trick to get it to engage,
cannot insert new cable in VK150 due to bar inside the grip