Disassembly
52
33. Lift the slider keypad up then remove it from the slider as shown.
Figure 59. Removing the Slider Keypad
34. To replace, align the slider mechanism to the slider assembly and slide the
mechanism onto the slider assembly.
35. Insert the slider arm bushing into the cutout in the slider assembly.
36. With the connector on the hydra-flex in the open position, insert the display
flex fully into the ZIF connector. Close the ZIF connector to lock the flex.
Figure 60. Inserting the Display Flex ZIF Connector
February 19, 2008
Slider keypad
Display flex ZIF connector
Z6m/Z6tv CDMA
v513072
v513340
6809513A80-B