Checking The Status Of This Unit - Yamaha PJP-CAM1 Owner's Manual

To uninstall the PJP-CAM1 Camera Driver
Follow the procedure below to uninstall the PJP-
CAM1 Camera Driver from the computer.
1
From the taskbar, select [Start] – [Control
Panel].
The "Control Panel" screen appears.
2
Click "Add or Remove Programs".
The "Add or Remove Programs" screen
appears.
3
Select "YAMAHA PJP-CAM1 Camera
Driver", and then click "Remove".
The "Confirm Uninstall" screen appears.
4
Click "OK".
The uninstallation starts. When the
uninstallation is complete, the "Maintenance
Complete" message appears.
5
Click "Finish".
Tip
If the message to reboot the computer appears, reboot it.
Checking the status of
this unit
After the connection is complete, follow the
procedure below to check whether the computer
recognizes this unit properly.
1
From the taskbar, select [Start] – [Control
Panel] – [System] – [Hardware] tab –
[Device Manager].
The "Device Manager" screen appears.
Note
If the "System" icon is not displayed in the "Control
Panel" screen, click "Switch to Classic View" at the
left of the screen.
2
Check that the following items are
displayed in the list.
If the name of this unit is not displayed, it may
not be recognized by the computer. In this
case, check the connection and computer
settings.
5