Updating The Firmware Using A Local File; Checking The Firmware Release Note - Yamaha PJP-CAM1 Owner's Manual

Updating the firmware
using a local file
If the computer connecting to this unit cannot be
connected to the Internet, follow the procedure
below to update the firmware manually using a
local file.
Notes
• Once the firmware update is started, do not perform
any other operation until the update operation is
completed. If the update operation is interrupted, this
unit may become unusable, in which case you need
to return this unit to the factory for repairs.
• Do not remove the USB cable or LAN cable during
the firmware update. Otherwise, this unit could
become unusable, in which case you need to return
this unit to the factory for repairs.
1
From the menu bar of the "PJP-CAM1
Controller" screen, select [File] - [PJP-
CAM1 Firmware Update].
The "PJP-CAM1 License Agreement" screen
appears.
2
Read the contents carefully, select
"Accept all terms of the license
agreement", and then click "OK".
The "PJP-CAM1 Firmware Update" screen
appears.
If you do not agree with the contents of the
license agreement, click "Don't accept the
license agreement" to cancel the firmware
update.
3
Select "Specify a local file", and then
click "Start".
The "Open" screen appears.
4
Select the firmware file, and then click
"Open".
The firmware version confirmation screen
appears.
5
Check the latest firmware version, and
then click "OK" to start the firmware
update.
The firmware update starts.
Checking the firmware
release note
You can check the firmware release note by
clicking "Release Note" in the "PJP-CAM1 Firmware
Update" screen.
19