Figure 2.33 Front View Of The Cnf24; Table 2.36 Ports And Leds Of The Cnf24 - Samsung OfficeServ 7200 System Description

CHAPTER 2. Error! Use the Home tab to apply 제목 1,장 제목 1 to the text that you want to appear here.
Front View of CNF24
The front view of the CNF24 is shown in the figure below:
LAN
The components on the front panel of the CNF24 have the functions below:
Ports, LEDs
LAN
SIO
RST
RUN LED
SVC LED
LAN LED
MC LED
CONF LED
2-50
SIO

Figure 2.33 Front View of the CNF24

Table 2.36 Ports and LEDs of the CNF24

Port that connects the Ethernet.
Connector: RJ45
Cable: CAT 5 cable, UTP
UART port (for tests).
Button for resetting the CNF24.
This LED indicates CNF24 status.
- Off: Power is not being supplied.
- On: Booting.
- Blink: The RAM program is operating.
This LED indicates if the CNF24 service is being offered.
This LED turns on when the CNF24 software task can be serviced.
This LED indicates the status of the Ethernet link
- Red: Linked as 10 BASE-T Ethernet mode
- Red blink: Transmitting/receiving data as 10 BASE-T
- Green: Linked as 100 BASE-TX Ethernet mode
- Green blink: Transmitting/receiving data as 100 BASE-T
- Orange: Linked as 1000 BASE-TX Ethernet mode
- Orange blink: Transmitting/receiving data as 1000 BASE-TX
- Off: Link off
- Green blink: Auxiliary memory (NAND) is accessed.
- Off: No access
This LED indicates the number of the conference channel
- Green: 1~8 channels conferencing
- Orange: 9~16 channels conferencing
- Red: 17~24 channels conferencing
- Off: No conference
RUN SVC
RST CONF
Functions
© SAMSUNG Electronics Co., Ltd.
LAN MC
REC MEM BACKUP
CNF24