Table 2.35 Ports And Leds Of The Oas - Samsung OfficeServ 7200 System Description

CHAPTER 2. Error! Use the Home tab to apply 제목 1,장 제목 1 to the text that you want to appear here.
The components on the front panel of the OAS have the functions below:
Ports, LEDs
LAN
SIO
RST
PWR LED
RUN LED
LAN Tx LED
LAN Rx LED
SVC1 LED
SVC2 LED
SVC3 LED
SVC4 LED
Mounting the OAS in 16 channels slot
If the OAS is mounted on one of 16 channels slot, no board can be mounted on
the other slot. If any board is mounted on the other slot, the board will not work.
(If the slot 1 is occupied with the OAS, the slot 2 should be empty. And if the slot 2
is occupied with the OAS, the slot 1 should be empty.)
2-48

Table 2.35 Ports and LEDs of the OAS

Port that connects the Ethernet.
UART port (for tests).
Button for resetting the OAS.
This LED indicates the power supply status.
- Off: Power is not being supplied.
- On: Power is being supplied properly.
This LED indicates OAS status.
- Off: Power is not being supplied.
- On: Booting.
- Blink: The RAM program is operating.
This LED indicates the status of the Ethernet data transmission.
- Off: Data does not exist.
- On or blink: Data is being transmitted.
This LED indicates the reception status of the link and Ethernet data.
- Off: Data does not exist or the link is not connected.
- On or blink: Data is being received.
This LED indicates if the MGI service is being offered.
This LED turns on when the MGI software task can be serviced.
This LED indicates if the MFR service is being offered.
This LED turns on when the MFR software task can be serviced.
This LED indicates if the MPS service is being offered.
This LED turns on when the MPS software task can be serviced.
This LED indicates if the LINK is connected to MP.
This LED turns on when the LINK is connected to MP.
Functions
© SAMSUNG Electronics Co., Ltd.