Figure 15: Wrap The Sensor's Threads With Ptfe Tape; Figure 16: Mount The Sensor Manually Onto The Valve And Tighten It, Using An Adjustable Wrench - GE hydran m2 Installation Manual

Hydran* M2 Installation Guide

Figure 15: Wrap the Sensor's Threads with PTFE Tape

1. Install clamp around sensor.
2. Install sensor on valve.
3. Tighten using adjustable wrench.

Figure 16: Mount the Sensor Manually onto the Valve and Tighten it, Using an Adjustable Wrench

Page 22
16375 v9.0 Oct 12