Edge-Core vg007 Management Manual
  1. Manuals
  2. Brands
  3. Edge-Core Manuals
  4. Gateway
  5. VG007
  6. Management manual
Edge-Core vg007 Management Manual

Edge-Core vg007 Management Manual

Pocket voip gateway
Hide thumbs Also See for vg007:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Installation Manual
Powered by Accton
VG007
Management Guide
Pocket VoIP Gateway
www.edge-core.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the vg007 and is the answer not in the manual?

Questions and answers

Related Manuals for Edge-Core vg007

Summary of Contents for Edge-Core vg007

  • Page 1 Powered by Accton VG007 Management Guide Pocket VoIP Gateway www.edge-core.com...
  • Page 3 Management Guide Pocket VoIP Gateway VoIP Internet Gateway with IEEE 802.11b/g Wireless Access Point, IEEE 802.11b/g Wireless Client, and PSTN Telephony Functions...
  • Page 4 VG007 F1.0.6.X E012006-R01 150200025600E...

  • Page 5: Table Of Contents

    Table of Contents Chapter 1: Introduction Operating Modes Accessing the Web Management Interface The Advanced Setup Menus Manually Setting the Operating Mode Chapter 2: Using the Setup Wizard Gateway Wireless Client Access Point Chapter 3: Gateway Mode WAN Type DDNS LAN Settings Virtual Server Port Mapping...
  • Page 6 Table of Contents Chapter 5: Access Point Mode Chapter 6: System Settings Mode Configuration System Time Administrator Settings Configuration Tools UPnP Settings Chapter 7: Wireless Settings Wireless Settings Wireless Security Wireless QoS Chapter 8: VoIP Settings SIP Settings VoIP Advanced Settings Chapter 9: Status Information System Status System Log...
  • Page 7 Tables Table 3-1. Gateway Configuration Options Table 4-1. Wireless Client Configuration Options Table 5-1. Access Point Configuration Options Table 6-1. System Setting Table 7-1. Wireless Settings Table 8-1. VoIP Settings Table 9-1. Status Information...
  • Page 8 Figures Figure 1-1. Home Page Figure 1-2. Main Menu Figure 1-3. Manually Setting the Operating Mode Figure 2-4. Starting the Setup Wizard Figure 2-5. Gateway Settings Figure 2-6. Gateway WAN Type Figure 2-7. Gateway WAN Type - Cable Modem Figure 2-8. Gateway WAN Type - Fixed-IP xDSL Figure 2-9.
  • Page 9 Figures Figure 6-4. User Settings Figure 6-5. Configuration Tools Figure 6-6. UPnP Settings Figure 7-7. Wireless Settings Figure 7-8. Wireless Security Figure 7-9. QoS Settings Figure 8-10. VoIP SIP Settings Figure 8-11. VoIP Advanced Settings Figure 9-1. System Status Figure 9-2. Status Figure 9-3.
  • Page 10 Figures...

  • Page 11: Chapter 1: Introduction

    Chapter 1: Introduction The Pocket VoIP Gateway offers a user-friendly web-based management interface for the configuration of all the unit’s features. Any PC directly attached to the unit can access the management interface using a web browser, such as Internet Explorer (version 6.0 or above), Firefox (version 1.5 or above), or Opera (version 8.51 or above).

  • Page 12: The Advanced Setup Menus

    Introduction In the web browser’s address bar, type the default IP address: http://192.168.7.1. The web browser displays the Pocket VoIP Gateway’s home page. Figure 1-1. Home Page Logging In – Type the default password “admin” and click Login. For information on configuring a password, see “Administrator Settings”...

  • Page 13: Manually Setting The Operating Mode

    Manually Setting the Operating Mode Gateway Mode: • Status – Display system information. see page 9-1 • System – Configure the mode and other settings. see page 6-1 • WAN – Configure WAN port connection settings. see page 3-3 • LAN – Configure LAN settings. see page 3-6 •...

  • Page 14: Figure 1-3. Manually Setting The Operating Mode

    Introduction Figure 1-3. Manually Setting the Operating Mode For more information on the Mode Configuration page, see “Mode Configuration” on page 6-2.

  • Page 15: Chapter 2: Using The Setup Wizard

    Chapter 2: Using the Setup Wizard The Pocket VoIP Gateway can automatically configure its operating mode for use as a gateway or wireless client. However, it still requires some manual configuration for other modes, its WAN port connection, wireless settings, and VoIP functions. The Setup Wizard takes you through the basic configuration steps for the current operating mode.

  • Page 16: Figure 2-5. Gateway Settings

    Using the Setup Wizard Figure 2-5. Gateway Settings ESSID (Extended Service Set Identifier) – The ESSID is a name that uniquely identifies the wireless network provided by the Pocket VoIP Gateway. Clients that want to connect to the wireless network must set their SSID to the same as that of the Pocket VoIP Gateway.

  • Page 17: Figure 2-7. Gateway Wan Type - Cable Modem

    Gateway Dynamic-IP Cable Modem – Selects configuration for a cable modem Internet connection. Fixed-IP xDSL – Selects configuration for a fixed IP address xDSL Internet connection. Dial Up xDSL (PPPoE) – Selects configuration for an Internet connection using the Point-to-Point Protocol over Ethernet (PPPoE). WAN Settings –...

  • Page 18: Figure 2-9. Gateway Wan Type - Dial-Up Xdsl

    Using the Setup Wizard ISP Gateway Address – The gateway IP address of your ISP. Figure 2-9. Gateway WAN Type - Dial-Up xDSL For a dial-up xDSL (PPPoE) connection you are prompted for the following information: User Name – Enter your user name for connecting to the xDSL service, as supplied by your ISP.

  • Page 19: Figure 2-10. Gateway Voip Configuration

    Gateway VoIP (Voice over Internet Protocol) – The VoIP page allows you to configure SIP (Session Initiation Protocol) parameters for enabling Internet telephony. VoIP service providers operate SIP “proxy servers” that allow you to register your Pocket VoIP Gateway on their system so that you can make telephone calls over the Internet.

  • Page 20: Wireless Client

    Using the Setup Wizard Wireless Client When configuring the unit to operate as a wireless client, you will need to proceed through the following two steps: Settings – The settings page takes you through the process of searching and selecting the access point to which you want to connect. If you know the SSID of the wireless network, you can enter it directly in the text box provided.

  • Page 21: Figure 2-12. Wireless Client Site Survey

    Wireless Client Figure 2-12. Wireless Client Site Survey The Site Survey page displays a list of access points that are within range for connection. Upon selection of a suitable access point, the unit asks you to confirm if you want to connect to that particular access point. Figure 2-13.

  • Page 22: Figure 2-15. Setup Wizard Voip Settings

    Using the Setup Wizard VoIP (Voice over Internet Protocol) – The VoIP page allows you to configure SIP (Session Initiation Protocol) parameters for enabling Internet telephony. VoIP service providers operate SIP “proxy servers” that allow you to register your Pocket VoIP Gateway on their system so that you can make telephone calls over the Internet.

  • Page 23: Access Point

    Access Point Access Point When configuring the unit to operate as an access point, you need to proceed through the following two steps: Settings – The Settings page takes you through the SSID (Service Set Identifier) configuration. Figure 2-16. Access Point Settings ESSID (Extended Service Set Identifier) –...

  • Page 24: Figure 2-17. Access Point Voip Configuration

    Using the Setup Wizard Figure 2-17. Access Point VoIP Configuration Proxy Server Address – Address of the VoIP service provider proxy server. Proxy Server Port – The TCP port number used by the VoIP service provider’s proxy server. (Default: 5060) User Authentication Name –...

  • Page 25: Chapter 3: Gateway Mode

    Chapter 3: Gateway Mode Operating in Gateway mode, the Pocket VoIP Gateway provides comprehensive firewall features and NAT isolation for Internet traffic passing from the WAN port to wireless clients, or to a local network connected to the LAN port. The DHCP server feature can assign IP addresses for up to 32 local network PCs and wireless clients.
  • Page 26 Gateway Mode Table 3-1. Gateway Configuration Options Menu Description Page Wireless Configures wireless settings Setting Sets the ESSID, radio channel, and other settings Security Configures wireless encryption and authentication Wireless QoS Controls QoS for traffic prioritization VoIP Configures VoIP parameters SIP Settings Configures SIP parameters Advanced Setting...

  • Page 27: Wan

    Specify the WAN connection parameters provided by your Internet Service Provider (ISP). WAN Type Specifies the type of WAN connection to use from a list of options. The selected option depends on the device connected to the WAN port and your specific ISP service.

  • Page 28: Dns

    Gateway Mode DNS (Domain Name System) server addresses are usually provided by service providers, however if you want to specify certain servers, the DNS page allows you to enter primary and secodary DNS addresses. Figure 3-3. Gateway Mode DNS Setup •...

  • Page 29: Ddns

    DDNS Dynamic DNS (DDNS) provides users on the Internet with a method to tie a specific domain name to the unit’s dynamically assigned IP address. DDNS allows your domain name to follow your IP address automatically by changing your DNS records when your IP address changes.

  • Page 30: Lan

    Gateway Mode The Pocket VoIP Gateway must have a valid IP address for management using a web browser and to support other features. The unit has a default IP address of 192.168.7.1. You can use this IP address or assign another address that is compatible with your existing local network.

  • Page 31: Nat

    Network Address Translation (NAT) is a standard method of mapping multiple "internal" IP addresses to one "external" IP address on devices at the edge of a network. For the Pocket VoIP Gateway, the internal (local) IP addresses are the IP addresses assigned to PCs and wireless clients by the DHCP server, and the external IP address is the IP address assigned to the WAN port.

  • Page 32: Port Mapping

    Gateway Mode • Public Port – Specifies the public port used for the service. • Enabled – Enables the virtual server mapping on the specified ports. Port Mapping Some applications, such as Internet gaming, videoconferencing, Internet telephony and others, require multiple connections. These applications cannot work with Network Address Translation (NAT) enabled.

  • Page 33: Dmz

    If you have a client PC that cannot run an Internet application properly from behind the NAT firewall, you can open the client up to unrestricted two-way internet access by defining a virtual-DMZ (virtual-demilitarized-zone) host. Figure 3-8. Gateway Mode DMZ •...

  • Page 34: Firewall

    Gateway Mode Firewall The Pocket VoIP Gateway provides extensive firewall protection by restricting connection parameters to limit the risk of intrusion and defending against a wide array of common hacker attacks. However, for applications that require unrestricted access to the Internet, you can configure a specific client/server as a demilitarized zone (DMZ).

  • Page 35: Firewall Options

    Firewall Firewall Options The Pocket VoIP Gateway’s firewall enables access control of client PCs, blocks common hacker attacks, including IP Spoofing, Land Attack, Ping of Death, Smurf Attack, TCP null scan, ICMP defect, and TCP SYN flooding. The firewall does not significantly affect system performance and it is best to leave it enabled to protect your network.

  • Page 36: Client Filter

    Gateway Mode Client Filter You can block access to the Internet from clients on the local network by specifying IP addresses, port numbers and types. Figure 3-11. Gateway Mode Client Filter • Enable Client Filter – Enables the feature. • IP – Specifies an IP address or range on the local network. •...

  • Page 37: Mac Control

    Firewall MAC Control You can block access to the Internet from clients on the local network by MAC addresses. Figure 3-12. Gateway Mode MAC Control • MAC Address Control – Enables the feature. • Block Connect to Internet – Blocks Internet access for the scpecified MAC address.
  • Page 38 Gateway Mode 3-14...

  • Page 39: Chapter 4: Wireless Client Mode

    Chapter 4: Wireless Client Mode Operating in Wireless Client mode, the Pocket VoIP Gateway can connect to an 802.11b/g wireless network, forwarding traffic from an attached PC. To access a wireless network in Wireless Client mode, connect your PC to the LAN port and then set your PC’s network connection to DHCP.

  • Page 40: Mode Configuration

    Wireless Client Mode Table 4-1. Wireless Client Configuration Options Menu Description Page VoIP Configures VoIP parameters SIP Settings Configures SIP parameters Advanced Setting Configures call forwarding, and DTMF parameters Mode Configuration When operating in Wireless Client mode, you must set a Service Set Identification (SSID) to identify the wireless network service to which you want to connect.

  • Page 41: Connecting To An Access Point

    Mode Configuration - Wireless Client – The unit operates as a wireless client to connect to nearby access points: - Site Survey – Performs a wireless scan on all channels to detect all nearby access points. A list of deteced access points is displayed from which you can select an access point to connect to.

  • Page 42: Figure 4-4. Confirm Wireless Client Connection

    Wireless Client Mode From the displayed list, select the wireless network ESSID you want to connect to by clicking the radio button. Click the Connect AP button. A message displays to confirm if you want to connect to that particular access point. Click OK to complete the connection and return to the Mode Config page.

  • Page 43: User Settings

    User Settings User Settings The User Settings page allows you to change the web interface management access password and set the interface logout time. Figure 4-6. Wireless Client User Settings • Current Password – Type your current password. (Default: admin) •...

  • Page 44: System Tools

    Wireless Client Mode System Tools The System Tools page allows you to upload new runtime code to the unit, restore factory default settings, save and restore the unit’s configuration settings, and to reset the unit. Figure 4-7. Wireless Client Configuration Tools •...

  • Page 45: System Status

    System Status • Reset Personal Gateway – Allows the user to reboot the unit. System Status The system status page displays connectivity status information for the unit’s wireless and LAN interfaces, as well as firmware and hardware version numbers. Figure 4-8. Wireless Client System Status In Wireless Client mode, the Pocket VoIP Gateway requests an IP address from the wireless network’s DHCP server.
  • Page 46 Wireless Client Mode • DNS – Displays a configured DNS address and any DNS address assigned by DHCP (displayed in parenthesis). The DNS IP can only be configured when in Gateway mode. • Secondary DNS – Displays a configured secondary DNS address and any secondary DNS address assigned by DHCP (displayed in parenthesis).

  • Page 47: System Log

    System Log System Log The System Log page displays Pocket VoIP Gateway system events. Figure 4-9. Wireless Client System Log...
  • Page 48 Wireless Client Mode 4-10...

  • Page 49: Chapter 5: Access Point Mode

    Chapter 5: Access Point Mode Operating in Access Point mode, the Pocket VoIP Gateway provides 802.11b/g connectivity for wireless clients, with robust security options available and QoS support for voice or video traffic. In Access Point mode, the WAN and LAN ports act like two normal Ethernet switch ports.
  • Page 50 Access Point Mode Table 5-1. Access Point Configuration Options Menu Description Page VoIP Configures VoIP parameters SIP Settings Configures SIP parameters Advanced Setting Configures call forwarding, and DTMF parameters...

  • Page 51: Chapter 6: System Settings

    Chapter 6: System Settings The Pocket VoIP Gateway’s Advanced Setup System settings menu provides the same configuration options in both Gateway and Access Point mode. These settings allow you to change the operating mode, set the system time, configure a management access password, and upgrade the system software.

  • Page 52: Mode Configuration

    System Settings Mode Configuration The Mode Configuration parameters for the unit can be left at their default settings (Auto). However, manually selecting the manner in which the unit operates allows you to select Access Point mode and configure a greater range of parameters. When operating in Wireless Client mode, you should set a Service Set Identification (SSID) to identify the wireless network service to which you want to connect.

  • Page 53: System Time

    System Time - Show Connection Status – Displays the connection status of the unit and the selected access point. - Access Point – The unit operates as an access point that passes data between a wired network and wireless clients. System Time The Pocket VoIP Gateway uses the Simple Network Time Protocol (SNTP) to set its internal clock based on periodic updates from a time server (SNTP or NTP).

  • Page 54: Administrator Settings

    System Settings Administrator Settings The Administrator Settings page allows you to change the default password, set a remote management IP address, and configure email alerts. Figure 6-4. User Settings • Administrator Settings – Use the administrator settings to change the password and control the auto-logout time.
  • Page 55 Administrator Settings • Remote Management – By default, management access is only available to users on your local network, that is, those connected to the LAN port or wireless clients. However, you can also manage the unit from a remote host through the WAN port by entering a specific IP address or range of addresses that are allowed access.

  • Page 56: Configuration Tools

    System Settings Configuration Tools The Configurations Tools page allows you to upload new runtime code to the unit, restore factory default settings, save and restore the unit’s configuration settings, and to reset the unit. Figure 6-5. Configuration Tools • Firmware Update – Downloads an operation code file from the web management station to the Pocket VoIP Gateway using HTTP.

  • Page 57: Upnp Settings

    UPnP Settings UPnP Settings UPnP (Universal Plug and Play Forum) provides inter-connectivity between devices supported by the same standard. Figure 6-6. UPnP Settings • Enable UPnP – Enables UPnP support for the device.
  • Page 58 System Settings...

  • Page 59: Chapter 7: Wireless Settings

    Chapter 7: Wireless Settings The Pocket VoIP Gateway includes an IEEE 802.11g radio interface for wireless communications. The Wireless set up pages include configuration options for the radio signal characteristics, wireless security, and Quality of Service (QoS) features. The configuration of wireless settings is available in Gateway Mode and Access Point Mode only.

  • Page 60: Figure 7-7. Wireless Settings

    Wireless Settings Figure 7-7. Wireless Settings • Regulation Domain – Indicates the unit’s regulatory domain setting. Units intended for use in the United States are configured to use only radio channels 1-11 at certain transmit power levels, as defined by FCC (Federal Communications Commission) regulations.
  • Page 61 Wireless Settings - B Only Mode: Both 802.11b and 802.11g clients can communicate with the unit, but 802.11g clients can only transfer data at 802.11b standard rates (up to 11 Mbps). • Channel ID – The radio channel used by the unit and its clients to communicate with each other.

  • Page 62: Wireless Security

    Wireless Settings try setting the fragment size to send smaller fragments. This will speed up the retransmission of smaller frames. However, it is more efficient to set the fragment size larger if very little or no interference is present because it requires overhead to send multiple frames.

  • Page 63: Figure 7-8. Wireless Security

    Wireless Security To configure wireless security click on Security. Figure 7-8. Wireless Security • Encryption Type – Selects the data encryption method to use: - None – No data encryption is used. - Share – Use a WEP share key for encryption. If you choose to use WEP shared keys, be sure to define at least one static WEP key.
  • Page 64 Wireless Settings - TKIP/AES – Use both TKIP and AES keys for encryption. WPA2 defines a transitional mode of operation for networks moving from WPA security to WPA2. WPA2 Mixed Mode allows both WPA and WPA2 clients to associate to a common SSID interface.

  • Page 65: Wireless Qos

    Wireless QoS Wireless QoS Wireless networks offer an equal opportunity for all devices to transmit data from any type of application. Although this is acceptable for most applications, multimedia applications (with audio and video) are particularly sensitive to the delay and throughput variations that result from this equal opportunity wireless access method.
  • Page 66 Wireless Settings...

  • Page 67: Chapter 8: Voip Settings

    Chapter 8: VoIP Settings VoIP stands for Voice over Internet Protocol. By using VoIP technology you can effectively use the internet to make phone calls. This is done by placing the voice calls on the network by encrypting a voice call into data packets at one end and then decrypting it back into voice calls at the other end.

  • Page 68: Sip Settings

    VoIP Settings SIP Settings To enter the SIP configuration page, click SIP Settings. Figure 8-10. VoIP SIP Settings • SIP Listen Port – The port on which the unit will listen and transmit voice-data traffic, as specified by your VoIP provider. (Default: 5060) •...

  • Page 69: Voip Advanced Settings

    VoIP Advanced Settings VoIP Advanced Settings To enter the advanced VoIP configuration page, click Advanced Settings. STUN (Simple Traversal of UDP through NAT (Network Address Translation)) is a protocol for assisting devices behind a NAT firewall or router with their packet routing.
  • Page 70 VoIP Settings...

  • Page 71: Chapter 9: Status Information

    Chapter 9: Status Information The Pocket VoIP Gateway includes status information pages for details on the unit’s current settings, event logs, and DHCP clients. The status information described in this chapter applies to Gateway Mode and Access Point Mode only. Figure 9-1.

  • Page 72: System Status

    Status Information System Status The system status page displays connectivity status information for the unit’s WAN and LAN interfaces, firmware and hardware version numbers, and the number of clients connected to your network. Figure 9-2. Status WAN – Displays WAN connection type and status: •...

  • Page 73: System Log

    System Log Information – Displays the number of connected clients as well as the unit’s hardware and firmware version numbers: • Connected Clients – Displays the number of connected clients, if any. • Runtime Code Version – Displays the runtime code version. •...

  • Page 74: Dhcp Client List

    Status Information DHCP Client List The DHCP Client List page allows you to see what devices are currently connected to the unit and have been assigned an IP address by the DHCP server. Figure 9-4. DHCP Client List...

  • Page 75: Appendix A: Troubleshooting

    Appendix A: Troubleshooting Check the following items before you contact local Technical Support. If wireless clients cannot access the network, check the following: • Be sure the Pocket VoIP Gateway and the wireless clients are configured with the same Service Set ID (SSID). •...
  • Page 76 Troubleshooting reset button on the side panel for 5 seconds or more. Then use the default user name “admin” and a null password to access the management interface.

  • Page 77: Glossary

    Glossary 10BASE-T IEEE 802.3 specification for 10 Mbps Ethernet over two pairs of Category 3 or better UTP cable. 100BASE-TX IEEE 802.3u specification for 100 Mbps Fast Ethernet over two pairs of Category 5 or better UTP cable. Access Point An internetworking device that seamlessly connects wired and wireless networks.
  • Page 78 Glossary Broadcast Key Broadcast keys are sent to stations using 802.1X dynamic keying. Dynamic broadcast key rotation is often used to allow the access point to generate a random group key and periodically update all key-management capable wireless clients. CSMA/CA Carrier Sense Multiple Access with Collision Avoidance.
  • Page 79 Glossary IEEE 802.11g A wireless standard that supports wireless communications in the 2.4 GHz band using using Orthogonal Frequency Division Multiplexing (OFDM). The standard provides for data rates of 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps. IEEE 802.11g is also backward compatible with IEEE 802.11b.
  • Page 80 Glossary RADIUS A logon authentication protocol that uses software running on a central server to control access to the network. Roaming A wireless LAN mobile user moves around an ESS and maintains a continuous connection to the infrastructure network. RTS Threshold Transmitters contending for the medium may not be aware of each other.
  • Page 81 Glossary Wi-Fi Protected Access WPA employs 802.1X as its basic framework for user authentication and dynamic key management to provide an enhanced security solution for 802.11 wireless networks. Wired Equivalent Privacy (WEP) WEP is based on the use of security keys and the popular RC4 encryption algorithm.
  • Page 82 Glossary Glossary-6...

  • Page 83: Index

    Index access point, setup wizard factory defaults, restore 4-6, 6-6 active key firmware update 2-3, 3-3 administrator settings fixed-IP xDSL AP name fragmentation threshold authentication 2-2, 2-9, 7-2, 7-4, 7-6 type auto-reconnect Gateway mode DHCP server setup wizard backup settings beacon interval 3-11 hacker attack protect...
  • Page 84 Index Simple Network Time Protocol SNTP NAT traversal setting SIP domain SIP listen port site survey SNTP 2-2, 2-9, 7-2, 7-4, 7-6 open system 2-2, 2-9 SSID Broadcast SSID, configuring status information password 2-3, 3-6 subnet mask private IP 4-8, 9-3 system information private port 4-9, 9-3...
  • Page 86 Model Number: VG007 Pub. Number: 150200025600E, E012006-R01...

Table of Contents