Power Supply; Unlock Retaining Clips; Inserting Dimm Into Socket - HP ProLiant DL100 G2 Administration Manual

Figure 61 Unlock retaining clips
2. Carefully insert the DIMM into the socket until the retaining clips snap back in place.
Figure 62 Inserting DIMM into socket
3.
Reattach the rear top cover (see

Power supply

CAUTION:
Remove power to the server by disconnecting the power cord before removing or installing a power
supply.
Refer to Figure 63
"Rear top
for the location of the power supply.
cover" on page 121).
HP ProLiant DL100 G2 Storage Server administration guide
125