Powering on the server
Power on the server after connecting the cables.
1.
Power on server by pushing the I/O button (1). The power LED
located on the I/O button illuminates.
Figure 6 Power on button
2.
Insert the HP ProLiant Storage Server System Installation and Recovery
DVD into the storage server disk drive to finalize the operating system
installation and updates.
IMPORTANT:
To successfully complete the installation and update
process, you must run the HP ProLiant Storage Server
System Installation and Recovery DVD. If you have not
inserted this DVD into the disk drive when you boot the
server, you will be prompted to do so. Follow the steps
below to complete the server installation.
3.
If the following screen comes up on your PC, click Exit and reboot or
hold the power I/O button for 10 seconds.
HP ProLiant DL380 G4 Storage Server installation guide
1
5058
27