Transferring A Call After A Speaker Call Announcement In A Group - Siemens OpenStage 60T User Manual

Step by Step
Consultation
Calls
g
Speaker call
Transfer
Transferring a call after a speaker call
announcement in a group
If this function has been configured (contact your ser-
vice personnel), you can use a speaker call (announce-
ment, ! page 142) to announce a call in progress to a
group of users ! page 64.
After a member of the group has accepted the call re-
quest, you can transfer the waiting party.
Prerequisite: You are conducting a call.
Confirm. The other party is placed on hold.
v
Open the Program/Service menu ! page 40.
Select and confirm the option shown.
Select and confirm the option shown.
j
Enter the group's station number.
[
Announce the call.
When a member of the group accepts the call
! page 56, you are connected to this party.
\
Replace the handset.
or
Select and confirm the option shown
If the connection between the two other parties
is not established within 45 seconds, the call
from the first party returns to you (recall).
[1] „Differing display view in a HiPath 4000 environment (not for
!
HiPath 500)"
Enhanced phone functions
Seite 185
[1]
.
75