Digital Operator Jvop-180 Keys And Displays - YASKAWA L1000E Quick Start Manual

◆ Digital Operator JVOP-180 Keys and Displays

Use the digital operator to enter Run and Stop commands, edit parameters, and display data including fault and alarm
information.
■ Keys and Displays
Figure 35
No. Display
F1
Function Key
1
(F1, F2)
F2
2 ESC ESC Key
3 RESET Key
RESET
4 RUN Key
RUN
5 Up Arrow Key
6 Down Arrow Key
7 STOP Key
STOP
8 ENTER Key
ENTER
9 LO/RE Selection Key
LO
RE
10 RUN Light
RUN
11 LO/RE Light
LO
RE
12 ALM LED Light
YASKAWA TOEPYAIL1E01A YASKAWA AC Drive L1000E Quick Start Guide
DIGITAL OPERATOR JVOP-180
1
F1
2
ESC
3
RESET
10
RUN
4 5 6
Figure 35 Keys and Displays on the Digital Operator
Name
The functions assigned to F1 and F2 vary depending on the currently displayed menu.
The name of each function appears in the lower half of the display window.
• Returns to the previous display.
• Moves the cursor one space to the left.
• Pressing and holding this button will return to the Speed Reference display.
• Moves the cursor to the right.
• Resets the drive to clear a fault situation.
Starts the drive in the LOCAL mode.
The Run LED
• is on, when the drive is operating the motor.
• flashes during deceleration to stop or when the speed reference is 0.
• flashes quickly, the drive is disabled by a DI, the drive was stopped using a fast stop
DI, or an Up/Down command was active during power up.
Scrolls up to display the next item, select parameter numbers, and increment setting
values.
Scrolls down to display the previous item, select parameter numbers, and decrements
setting values.
Stops drive operation.
<1>
• Enters parameter values and settings.
• Selects a menu item to move between displays.
Switches drive control between the operator (LOCAL) and the control circuit
terminals (REMOTE) for the Run command and speed reference. The LED is on
<2>
when the drive is in the LOCAL mode (operation from keypad).
Lit while the drive is operating the motor. Refer to page
Lit while the operator is selected to run the drive (LOCAL mode). Refer to page
for details.
Refer to ALARM (ALM) LED Displays on page
12
ALM
Y E A _ c o m
11
F2
9
LO
RE
8
ENTER
STOP
7
Function
56.
4 Start-Up Programming
56 for details.
56
4
53