Table of Contents
Advertisement
Key Click
This check box enables (checked) or disables (unchecked) audible key clicks from the
terminal. Default is on (checked).
Printer Type
This scrolling list selects the attached printer type. The default value is
no printer is attached.
Terminal Setup Using Twin Client Menus
For compatibility with other PowerNet products, the PowerNet Twin Client for Fujitsu
also supports the standard Twin Client configuration menu system on the terminal. This
menu system is accessed by pressing uppercase
Twin Client
© 1991-2006, Connect, Inc.
Keypress to Continue
The following menu appears.
Edit Menu Options
Edit Mobile Unit IP
Edit Server/Host IPs
Edit Radio Option
Edit License Key
Run Site Survey
Switch Client Modes
Run Client Emulator
Exit to OS
Use the
the highlighted option. Each menu option is described below.
Edit Mobile Unit IP
The IP list contains the terminal IP address, the Subnet Mask and the Router IP address.
Enter the appropriate address. Select
IP 206.232.71.38
SN 255.255.255.0
RT 206.232.71.1
<F3> Save <F7> Quit
Edit Server/Host IPs
If the host IP address(es) were not pre-configured as described in the Setting the Servers
section of Configuring the Manager, or if you wish to change those settings using the
terminal menus, select this option and enter up to four Host IP addresses as required.
Supported Equipment Manual
and
Up-Arrow
Down-Arrow
•
May, 2006
at the Twin Client main menu below.
C
keys to navigate the menu, and press
<F3>
to save and/or
<F7>
Terminal Setup
none
, indicating
to select
Enter
to Quit, as shown below.
2-19
Advertisement
Table of Contents
