Transfers Menu; Upload - ABB CAP 505 User Manual

CAP 505
2. Using the Protocol Edit-
ing Tool
2.3.5.
2.3.5.1.
8
Protocol Editing Tool
User's Guide
)LJ  7KH YLHZ PHQX
With the functions in this menu you define which signals you want to view in the
POD table. This method of showing the signals can be called virtual filtering. This
means that the signals are only filtered out from the user view, not from the
configuration. The view menu contains two toggle menu groups with the following
options.
In the first group you have the following functions:
• Show In Use signals (Only "In Use" signals will be shown).
• Show NOT In Use signals (Only "Not In Use" signals will be shown).
• Show both (Both "In Use" and "Not In Use" signals are shown).
In the other group you have the following functions:
• Show signals of Active Function Blocks (Only signals that belongs to the active
function blocks list will be shown.)
• Show signals of InActive Function Blocks (Only signals that do not belong to the
active function blocks list will be shown.)
• Show both (Signals of both InActive and Active Function Blocks will be shown.)
"Show both" is the default menu item for group one and "Show signals of Active
Function Blocks" is the default for group two.

Transfers menu

The Transfers menu contains four different functions shown in the figure below (see
Figure 2.3.5.-1).
)LJ  7KH 7UDQVIHUV PHQX

Upload

The upload function transfers all the table cells to the computer.
1MRS751982-MUM
ABB Automation