Table of Contents
Advertisement
Remote control
STOP button
Use this button to stop the chair
operation immediately if you feel an
abnormal physical sensation or a
problem with the chair itself.
Shape sensor indicator
The shape sensor flashes when it is
measuring the position of your
shoulders, and illuminates once
measurement is complete.
AUTO buttons
You can use these buttons to select
either comfort mode or normal mode
for the "NECK & SHOULDER", "BACK"
and "LOWER BACK" courses, for a
total of six different courses.
If you press any of the buttons twice,
the comfort mode course will be set
and the button will flash.
CALF & FOOT button
This is used for massaging the soles,
feet and the calves.
The strength can be adjusted to one of
three settings by pressing button.
Manual massage buttons
You can use these buttons to select
the desired type of massage from
"KNEADING", "RUB-KNEADING",
"TAPPING", "LATERAL TAPPING",
"SHIATSU", "KNEAD & TAP", "FULL
STRETCH" and "PARTIAL STRETCH".
20 different massage combinations
are possible in this mode.
Massaging roller adjustment buttons
Use these to adjust the speed and
width of the massaging rollers.
Note:
¡The HOME button, RECLINING buttons and FOOT REST buttons can be used even when massaging operation is off.
¡The HOME button will not function (home position adjustment will not be carried out) while the chair is moving to
the preset ZERO-G position.
¡The ZERO-G button will not function (ZERO-G position adjustment will not be carried out) while the chair is moving
to the home position.
POWER indicator
This illuminates when the power switch
of the chair is turned on.
ON/OFF button
This turns operation on and off.
The indicator illuminates during
operation and switches off when
operation is stopped. It flashes when
the massaging rollers are retracted.
ZERO-G button
This is used to adjust the back rest,
seat and foot rest automatically to the
preset, ZERO-G position.
The button will flash when the chair is
not in the ZERO-G position, and it will
illuminate when in this position.
HOME button
This is used to automatically return the
back rest, seat and foot rest to their
home positions.
This button will flash for approximately
10 seconds if the massage timer has
expired and massaging is finished, or if
you press the ON/OFF button to cancel
massaging before a course is complete.
It will illuminate while the chair is
moving to the home position and when
operation is complete.
RECLINING buttons
This adjusts the angles between the
back rest, seat and the foot rest.
The back rest, seat and foot rest move
in conjunction with each other.
FOOT REST buttons
This adjusts the angle of the foot rest.
ROLLER POSITION buttons
This adjusts the vertical position of
the massaging rollers. Use it also
when adjusting the shoulder position.
6
Advertisement
Table of Contents
