Table of Contents
Advertisement
Speed adjustment
Press the SPEED button.
¡Each time the button is pressed, the movement
speed (interval) for the massaging rollers changes
and the corresponding indicators illuminate.
(Slow)
4
If you would like to have your legs massaged, press the CALF & FOOT button.
¡When the CALF & FOOT button is pressed, massaging will start at the "Medium" setting.
Each time the button is pressed, the strength of massaging changes in the order weak – medium – strong -
off and the corresponding indicators illuminate.
■ After approximately 15 minutes, the timer will expire and massaging will
stop automatically.
¡The ON/OFF button will flash and the massaging rollers will move to the highest position and then stop.
¡If you have changed to some other manual massaging, massaging will continue for approximately 30 minutes
after the ON/OFF button was pressed, and then the timer will expire and massaging will stop.
¡If you are massaging your back and legs at the same time, the respective timers will each operate and each
massaging will finish approximately 15 minutes after they start.
If you would like to stop massaging before it is finished by timer
Press the ON/OFF button.
Stopping the chair immediately if you feel an abnormal physical sensation or a problem with the chair itself
Press the STOP button.
(Medium)
(Fast)
(Weak)
(The indicators switch off)
Width adjustment
Press the WIDTH button.
¡Each time the button is pressed, width of the
massaging rollers changes and the corresponding
indicators illuminate.
(Narrow)
* The width cannot be adjusted for "KNEADING",
"RUB-KNEADING", "KNEAD & TAP" and "SHIATSU".
(Medium)
(Strong)
Off
(Middle)
(Wide)
Page
14
16
Advertisement
Table of Contents
