Related Manuals for Evolution RAGE-B
Summary of Contents for Evolution RAGE-B
- Page 1 185mm (7 -1/4” Multipurpose Circular Saw Original Instruction Manual Read instructions before operating this tool. www.evolutionbuild.com...
-
Page 2: Table Of Contents
TABLE OF CONTENTS EC - DECLARATION OF CONFORMITY EC - Declaration of Conformity We, manufacturer and importer Evolution Power Tools Ltd. Important Information Venture One 12 Month Limited Warranty Sheffield S20 3FR General Safety Rules Declare that the product Safety Precautions for All Saws... -
Page 3: Month Limited Warranty
0870 609 2297 fitness or to waive any of the foregoing terms of sale and none shall be binding on Evolution Power Tools. Questions relating to this limited TCT STEEL CUTTING CIRCULAR SAW Congratulations on your purchase of an warranty should be directed to the company’s... - Page 4 SAFETY INSTRUCTIONS reduces the risk of electric shock. FOR CIRCULAR SAWS f) If operating a power tool in a damp location is unavoidable, use a residual WARNING: Read all instructions. Failure current device (RCD) protected supply. to follow all instructions listed below may Use of an RCD reduces the risk of electric result in electric shock, fire and/or serious shock.
- Page 5 4) Power Tool Use & Care 5) Service a) Do not force the power tool. Use the Have your power tool serviced by a correct power tool for your application. The qualified repair person using only genuine correct power tool will do the job better and replacement parts.
- Page 6 FURTHER SAFETY INSTRUCTIONS d) Support large panels to minimise the risk of blade pinching and kickback. Large Causes and operator prevention of kickback: panels tend to sag under their own weight. Kickback is a sudden reaction to a pinched, Supports must be placed under the panel on bound or misaligned saw blade, causing an both sides, near the line of cut and near the uncontrolled saw to lift up and out of the...
-
Page 7: Labels & Symbols
To obtain an additional copy of your manual, saw to walk backwards, cutting whatever is please contact Evolution Power Tools at: in its path. Be aware of the time it takes for the blade to stop after switch is released. -
Page 8: Specification
Sound pressure level: with the RPM of the machine. 96.8. dB(A) K 3 dB(A) Sound power level: ASSEMBLY 107.8. dB(A) K 3 dB(A) Your Evolution Power Tools saw is shipped Vibration level: complete. Remove all contents from the 2.048m/s K 1.5m/s... -
Page 9: Machine Overview
MACHINE OVERVIEW KNOW YOUR PARTS 1. REAR HANDLE 2. FRONT HANDLE 3. UPPER BLADE GUARD 4. LOWER BLADE GUARD 5. SOLE PLATE 6. CHIP EXHAUST PORT www.evolutionbuild.com... -
Page 10: Operation
Country of use. Do not alter or modify the power cord. Installing or Removing a Blade WARNING: Only use genuine Evolution blades which are designed for this machine. Ensure that the maximum speed of the blade is compatible with the machine. - Page 11 7. Reinstall the outer drive flange and the arbor socket headed screw. 8. Engage the arbor lock and tighten the arbor socket headed screw securely using the Allen key. Note: The socket headed arbor screw has a RH thread. 9. Check that the arbor lock is fully released by manually rotating the blade.
- Page 12 Adjustment of the Cutting Angle 1. Loosen the Bevel Locking Screw found at the front of the saw. (Fig. 6) 2. Tilt the blade to the required angle. (Fig. 7) 3. Tighten the Bevel Locking Screw securely Note: An angle scale (0 - 45 ) is incorporated into the Bevel Locking quadrant to aid setting.
-
Page 13: Maintenance
• Do not force the machine. All motor bearings in this machine are • Allow the speed of the saw blade do lubricated for life. No further lubrication is the work. Cutting performance will not be required. improved by applying excessive pressure to the machine, and blade life will be reduced. -
Page 14: Service Parts Diagram
SERVICE PARTS DIAGRAM www.evolutionbuild.com... - Page 15 NOTES www.evolutionbuild.com...
- Page 16 D11100...
Need help?
Do you have a question about the RAGE-B and is the answer not in the manual?
Questions and answers