Polaris RZR 170 Owner's Manual page 44

OPERATION
New Operator Driving Procedures
1. Read and understand this owner's manual and all warning and
instruction labels before operating this vehicle.
2. Watch the instructional video with the supervising adult.
3. Review the section of this owner's manual about starting the engine,
stopping the engine, braking and parking (pages 40-41).
4. Perform the pre-ride inspection (page 38).
5. The driver and all passengers must wear helmet, eye protection,
gloves, long-sleeve shirt, long pants, over-the-ankle boots and seat
belt at all times.
6. Do not operate or ride in this
vehicle if the clearance between
the top of your helmet and the
overhead cab frame is less than
2 inches (5 cm).
(continued on next page)
42
Minimum
2 inches
(5 cm)