TERK Technologies Trinity Xtend Setup Manual page 14

WIFI EXTENDER SETUP with COMPUTER
Using browser-based setup
The Terk Xtend WiFi Extender can also be set up via web browser on your computer.
1. In your computer's WiFi connection menu, choose the Wi-Fi Name (SSID) from the bottom
sticker of the Terk Xtend. The password is also on the bottom sticker.
Give your computer a full minute to connect to this new network. You'll see limited
connectivity.
2. Launch your web browser and enter the following URL:
http://192.168.168.1
If prompted for a user name and password, use admin for the user name and admin for the
password.
3. Follow the directions in the browser-based setup to configure the Xtend with your network.
4. When you've finished browser-based setup, wait for the Xtend to restart (about a minute or
so—the LINK light will turn solid blue), then connect the streaming devices you want to use
with the Xtend to the Xtend's network.
14
TO
Top
Botto