Table of Contents
Advertisement
■ Troubleshooting
● Indicators and Conditions
●
dic
ator
s an
nd C
Che
Check the indicators for LCD Projection TV condition.
the
di
ors f
r LC
Indicators
WARNING
POWER
red
red/green
• • • lights green.
• • • blinks green.
✽ Wh
✽ When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow. When
✽
he e n the
h
h e
the p
this
this indicator lights yellow, replace the projection lamp with a new one promptly. Reset the Lamp replace
indica
or
hts yel
counter after replacement of the lamp.
on
itio
ns
Pro
ectio
V
ondi on
LCD Projection TV Condition
LAMP
REPLACE
orange
The LCD Projection TV is OFF. (The AC power cord is unplugged.)
The LCD Projection TV is preparing for stand-by or the projection lamp is
✽
being cooled down. The LCD projection TV cannot be turned on until cooling
is completed.
The LCD Projection TV is ready to be turned on with the POWER ON-OFF
✽
button. The cooling fans are stopped.
The LCD Projection TV can be turned on with the POWER ON-OFF button.
✽
The cooling fans are running.
✽
The LCD Projection TV is operating normally.
Blinks slowly: The LCD Projection TV is in the Power management mode.
The
✽
Blinks rapidly: The LCD Projection TV is turned on from the stand-by mode.
The temperature inside the LCD Projection TV is abnormally high. The
LCD projection TV cannot be turned on. When the LCD Projection TV has
✽
cooled down enough and the temperature returns to normal, the POWER
indicator lights red and the LCD Projection TV can be turned on. (The
WARNING indicator keeps blinking.) Check and clean the Air filter.
The LCD Projection TV has been cooled down enough and the tempera-
✽
ture returns to normal. When turning on the LCD Projection TV, the
WARNING indicator stops blinking. Check and clean the air filters.
The LCD Projection TV detects an abnormal condition and cannot be
turned on. Unplug the AC power cord and plug it again to turn on the LCD
Projection TV. If the LCD Projection TV is turned off again, disconnect the
✽
AC power cord and contact the dealer or the service center for service and
checkup. Do not leave the LCD Projection TV on. It may cause electric
shock or a fire hazard.
• • • lights red.
• • • blinks red.
oje
j ction
lamp
draw
s to a
n en
ow
w, rep
ace t
he pr
jectio
e
LC
LC
P
P
Pr
oj
ctio
on T
V
s in
th
e P
• • • lights orange.
the
LAMP
LACE
am
p with
a new o
prom
mptly.
- 81 -
ow
ma
a
nag
em
n
t m
od
d
e
e
• • • off
indic
ator ligh
Reset th
Advertisement
Table of Contents
