Error Message - Lenovo LJ2500 User Manual

Error message

PRINT OVERRUN
RESOLUTION ADAPTED
(The printer has printed
the document at a
reduced resolution.)
TONER EMPTY
TONER LOW
FUSER MALFUNCTION
LASER BD MALFUNCTION
SCANNER MALFUNCTION
D-RAM ERROR
NV-RAM ERROR
MAIN MOTOR ERROR
ENGINE INTERFACE
ERROR
Action
• Press the control panel button to print the data
remaining in the printer.
• If this does not clear the error, reduce the complexity
of your document or reduce the print resolution.
• Expand the printer memory by adding a
commercially available SIMM. See
Additional Memory"
protection to ON by using the supplied Windows
driver or RPC program.
• Change the following settings in the supplied
Windows driver and try again. The best combination
of settings below will vary depending on your
document.
• Graphics Mode
TM
• True Type
mode
• Use Printer True Type
• Reduce the complexity of your document before
you print to prevent automatic reduction of the
resolution.
• Expand the printer memory by adding a
commercially available SIMM memory. See
"Installing Additional Memory"
• See "Replacing the Toner Cartridge" in Chapter 5.
• Purchase a new toner cartridge and have it ready
for when the Toner Empty status is indicated.
• Turn the power switch off, wait a few seconds and
then turn it on again.
• Leave the printer for 10 minutes with the power on.
If the error occurs again, consult your dealer.
• Turn the power switch off, wait a few seconds and
then turn it on again. If the error occurs again,
consult your dealer.
6-4
CHAPTER 6 TROUBLESHOOTING
"Installing
in Chapter 4. Set page
TM
Fonts
in Chapter 4.