Nokia 447ZiPlus Service Manual page 27

7-5.1. GEOMETRIC ADJUST
a. Press the MENU key to reveal the OSM, then using either the+key or -key to choose the geometric
adjustment.( SHAPE as shown on OSD )
b. Selecting the item which needs to be adjusted in the submenu disposed on the lower part of the OSM
c. Press the MENU key again, the OSM will address to exhibit the adjustment bar.
d. Press either+key or-key to change the magnitude of the setting until the optimized picture is obtained.
ICON NAME
Horizontal position
Horizontal size
Vertical position
Vertical size
Pincushion
Trapezoid
Rotation
Side Pin Balance
Parallelogram
Degauss
Monitor Defaults
Exit Menu
Language
FUNCTION
To adjust the horizontal position of the display
To adjust the width of the display
To adjust the vertical position of the display
To adjust the height of the display
To adjust any tapering or bowing of the
sides.
To adjust the top and bottom of the image to the same
size
To adjust the display tilt
To enable the OSD
menu to be moved horizontally.
To straighten the left or right side of the image.
(Only at preset OSD menu)
To square the image.
To degauss the display
To recall the original factory display settings or save
otherwise.
To remove the OSD menu
Changes the language display on OSM as require
25