General Connections & Applications - Nokia 447ZiPlus Service Manual

5. General Connection & Applications
Procedure for installing and using this model of ultra Super-VGA color display.
1. Set up the display at the desired operation location , on top of or beside your personal computer. Plug the
power cord into the monitor and then connect the other end of the power cord into an AC outlet. The
three-wire power cord is provided as a Safety Precautions to ensure proper electrical grounding
2. Signal cable 15 pin D sub connector pin assignment:
Pin assignment
3. First turn the PC power switch ON. Then apply power to the display by pressing the power ON/OFF
switch to power on monitor. The power indicator light will illuminate. Allow about thirty seconds for the
display tube to warm up , data will be displayed on screen.
4. Adjust the BRIGHTNESS and CONTRAST controls for the best readability. Adjust the H.Width and
H.Position control as necessary for proper horizontal display.
5. V. Height can be adjusted to give you a proportional vertical display.
NOTE :1. If your extended VGA color display requires service. Refer to the control and adjustment
information in this publication and verify that all controls and adjustment of the display are
properly set.
2. If your display does require service it must be returned with the power cord.
Description
1 Red
2 Green
3 Blue
4 Ground
5 Ground
6 Red Ground
7 Green Ground
8 Blue Ground
9 NOT Connected
10 Ground
11 ID O(tie to LG)
12 SDA
13 H.Sync
14 V.Sync
15 SCL
9
.