Camera Programming; Quick Set 1 (Q1); Quick Set 2 (Q2); Quick Set 3 (Q3) - Stealth Cam STC-G45NG Instruction Manual

This G45NG features six distinct modes of operation: OFF / Q1 / Q2 /Q3 / CUSTOM
/ TEST. Each setting is activated based upon the position of the switch on the
inside of the unit.
OFF – This position completely powers down the unit.
Q1 – This is the first Quick Set programming mode. When the camera is changed to the this
mode, the display screen will give a digital read out of how the camera is preprogrammed. It will
scroll across the display as follows:
With this setting the camera is preprogrammed to take photos at 8.0MP resolution, a 30 second
timeout delay between activations and takes a burst of 3 photos every trigger activation.
Q2 – This is the second Quick Set programming mode. This setting is preprogrammed to take
photos as 8.0MP resolution, 30-­‐second timeout delay and take a single photo per trigger
activation.
Q3 – This is the third Quick Set programming mode. This setting the camera is preprogrammed to
take a 720P HD Video with audio, have a 30 second timeout delay between activations, and each
video will be 10 seconds in length.
www.stealthcam.com
877-­‐269-­‐8490
CAMERA PROGRAMMING
PHOTO...8.0MP...30 S DELAY...3 PHOTO BURST
Page
7