Specifications - Panasonic dp-100 series Instruction Manual

17

SPECIFICATIONS

Item
Pressure type
Rated pressure range
Set pressure range
Pressure resistance
Applicable fluid
Supply voltage
Power consumption
Comparative output
Output operation
Hysteresis
Repeatability
Response time (ms)
Analog voltage output
External input
Ambient temperature
Ambient humidity
Temperature characteristics
Material
Weight
Accessories
SEN TRONIC
AG
Produkte, Support und Service
Standard type
Low pressure type
-100 to + 100kPa
-100 to + 100kPa
500kPa
• Normal operation: 840mW or less (current consumption 35mA or less at 24V supply voltage)
• ECO mode (STD): 600mW or less (current consumption 25mA or less at 24V supply voltage)
• ECO mode (FULL): 480mW or less (current consumption 20mA or less at 24V supply voltage)
NPN output type
• NPN open-collector transistor
• Maximum sink current: 100mA
• Applied voltage: 30V DC
comparative output and 0V)
• Residual voltage: 2V or less (at 100mA sink current)
0.1% F.S.
 within 2 digits
2.5, 5, 10, 25, 50, 100, 250, 500, 1000, 5000ms, selectable
_
_
-10 to +50°C (No dew condensation or ice formation allowed). Storage: -10 to +60°C.
0.5% F.S.
(20°C reference)
Enclosure: PBT (with glass fiber); LCD display: acrylic; Pressure port: stainless steel (SUS 303); Mounting screws:
brass (nickel-plated); O-ring: H-NBR; Switch: silicon rubber
40g approx. (DP-100-E type: 45g approx., DP-100-M type: 30g approx.) (Main body only)
CN-14A-C2 (Cable with a connector, 2m long; optional for J type). Unit switching label: 1 pc.
Rugghölzli 2
CH - 5453 Busslingen
High pressure type Low pressure type
Gauge pressure
-0.1 to +1.0MPa
-0.1 to +1.0MPa
1.5MPa
Non-corrosive gas
12 to 24V DC 10%, Ripple P-P 10% or less
• PNP open-collector transistor
• Maximum source current: 100mA
or less (between • Applied
comparative output and +V)
• Residual voltage: 2V or less (at 100mA source
current)
Either N.O. or N.C., selectable
Min. 1 digit (variable). When using psi units, 2 digits.
0.2% F.S.
 within 2 digits
• Output voltage: 1 to 5V
• Zero point: within 3V
5% F.S.
• Span: within 4V 5% F.S.
• Linearity: within 1% F.S.
• Output impedance: approx.
1k
• ON voltage:
+V DC
• OFF voltage:
0.6V DC or less or open
• Input impedance: approx. 10k
• Input time: 1ms or more
35 to 85% RH. Storage: 35 to 85% RH.
1% F.S.
(20°C reference)
Tel. +41 (0)56 222 38 18
Fax +41 (0)56 222 10 12
Multifunction type
High pressure type
-100 to + 100kPa -0.1 to +1.0MPa
-100 to + 100kPa -0.1 to +1.0MPa
500kPa
PNP output type
voltage: 30V DC or
0.1% F.S.
 within 2 digits  within 2 digits
• Output voltage: 0.6 to 5V
• Zero point: within 1V
5% F.S.
• Span: within 4.4V 5% F.S.
• Linearity: within 1% F.S.
• Output impedance: approx.
1k
NPN type
: 0.4V DC or less,
NPN type
: 5 to 30V DC or open,
0.5% F.S.
(20°C reference) (20°C reference)
mailbox@sentronic.com
www.sentronic.com
1.5MPa
less (between
0.2% F.S.
PNP type
: 5V to
PNP type
:
1% F.S.