Panasonic dp-100 series Instruction Manual page 6

11 PRO MODE
Item Description
Sub-display selec- Selects what is displayed in the sub-display.
• OFF: nothing.
tion
• Unit: pressure unit selected.
• No.**: desired number.
• CuSt: desired numbers, letters (as possible),
signs.
Display speed Sets the speed of how often the displayed pres-
selection sure value on the main display is updated.
Hysteresis fixed Sets hysteresis for the EASY mode and window
value selection comparator mode (8 levels).
Color display Color for main display based on either compara-
scheme selection tive output 1 or comparative output 2.
(Standard type only)
ECO mode setting Current consumption can be lowered.
• OFF: normal operation (ECO mode is off).
• Std: if no key operation is carried out for
approx. 5s in RUN mode, the display
becomes dark.
• FULL: if no key operation is carried out for
approx. 5s in RUN mode, the display is
turned off.
Press any key to temporarily show the normal
display.
Setting check code Current settings for DP-100 are stored in code,
which you can display.
See "Code table" on page 7.
Setting copy mode Settings can be copied from master sensors to
slave sensors. For details, see page 7, section
12, SETTING COPY FUNCTION.
ON: settings are copied.
ON-L: settings are copied; slave sensor is set in
key-lock state.
Reset setting Returns to default (factory) settings.
From RUN mode, press MODE for 4s to select pro mode.
The examples below begin with the factory default settings.
<RUN mode>
MODE Press 4s.
<Pro mode>
Setting:
When "No. display"
MODE or "Custom display"
is set in 'Sub-display
selection'.
Set flashing values
with Up and Down
keys.
<Sub-display selection>
Standard Display OFF Unit display
MODE
<Display speed selection>
(250ms) (500ms)
MODE
SEN TRONIC
AG
Produkte, Support und Service
<Sub-display selection>
Setting:
MODE MODE
MODE
MODE
<RUN mode>
Custom display
No. display
(1000ms)
Rugghölzli 2
CH - 5453 Busslingen
<Hysteresis fixed value selection>
MODE
Standard type only
<
Main display color will
change based on
comparative output 1
MODE
<ECO mode setting>
OFF Standard
MODE
2
<Setting check code>
Automatic
MODE
<Setting copy mode>
Copy sending Copy sending
OFF ON
MODE
<Reset setting>
MODE
MODE
MODE
1
1 level = approx. 1 digit, when Pa is selected as the pressure unit.
2
See "Code table" on page 7.
6
Tel. +41 (0)56 222 38 18
Fax +41 (0)56 222 10 12
1
・・・・ ・・・・
(Max.) (Min.)
: Color display scheme>
Main display color will
change based on
comparative output 2
Max.
Copy sending
ON-L
MODE MODE
mailbox@sentronic.com
www.sentronic.com