Table of Contents
Advertisement
from your operator the information items described in
the present section and enter them as given.
With some operators, access parameters can be set «over
the air». Please check directly by your operator.
Network account
Allows you to choose a data profile from the ones you
have set (see "Access settings" page 43 for complete in-
formation on how to configure or modify a data pro-
file). This profile and the parameters it features will
then be used for connection.
Bearer
This menu allows you to select the type of network
used when launching a connection.
GSM
Your mobile will only use the GSM
network for connections.
GPRS
Your mobile will only use the GPRS
network for connections.
GPRS first
Your mobile will first try to connect
to the GPRS network, then to the
GSM network if the GPRS network
isn't available when connecting.
If selecting GPRS first, you must have configured both
the GSM and GPRS settings (see "Access settings"
page 43).
64
MMS Centre
Allows you to enter or change the MMS address of the
server your phone will connect to.
Gateway address
Allows you to enter or change the IP address of the
server's gateway.
Gateway port
Allows you to enter or change the Port number of the
server's gateway.
You must have the information relating to the three
points above, supplied by your operator, and must enter
them exactly as given.
Application settings
Retrieval mode
Automatic
Any new MMS you receive is automatical-
(default
ly downloaded from the server and placed
in the Inbox, without you having to launch
mode)
a connection. Select the message you have
received in the
This mode is deactivated when roaming.
>
Inbox
and press
.
Messages
Advertisement
Table of Contents
