Settings; Network Account; Bearer; Mms Centre - Philips CT3508/ASUSA0P2 User Manual

Settings

Your phone may have been pre-configured to directly
access the services offered. If not, you must have received
from your operator the information items described in
the present section and enter them as given.
With some operators, access parameters can be set «over
the air». Please check directly by your operator.

Network account

Allows you to choose a data profile from the ones you
have set (see "Access settings" page 40 for complete
information on how to configure or modify a data
profile). This profile and the parameters it features will
then be used for connection.

Bearer

This menu allows you to select the type of network
used when launching a connection.
Your mobile will only use the GSM
GSM
network for connections.
Your mobile will only use the GPRS
GPRS
network for connections.
Multimedia messaging
GPRS first Your mobile will first try to connect
to the GPRS network, then to the
GSM network if the GPRS network
isn't available when connecting.
If selecting GPRS first, you must have configured both
the GSM and GPRS settings (see "Access settings"
page 40).

MMS Centre

Allows you to enter or change the MMS address of the
server your phone will connect to.

Gateway address

Allows you to enter or change the IP address of the
server's gateway.

Gateway port

Allows you to enter or change the Port number of the
server's gateway.
You must have the information relating to the three
points above, supplied by your operator, and must enter
them exactly as given.
21